Innovate LM-2 Single Channel Wideband Handheld meter with OBDII

Share
Innovate LM-2 Wideband Handheld Meter for Accurate Tuning
Rating:
100% of 100
In stock
Barcode
856428038060
SKU
3806
769.00€ 620.16€

The LM-2 Kit (Single Wideband O2) includes the LM-2 meter, Bosch wide-band oxygen sensor, 8 ft sensor cable, cigarette-lighter power adapter, analog in/out cable, ODB-II/CAN interface cable, USB cable for PC connection, weld-in bung and plug and quick-start guide. Carrying Case also included!

LM-2 (basic) Single Channel Wideband W/ OBDIIThe LM-2 combines an air/fuel ratio meter, a full-function 32-channel datalogger, and powerful software to deliver a complete tuning workshop for less than the cost of one dyno day.

 

The LM-2 combines an air/fuel ratio meter, a full-function 32-channel datalogger, and powerful software to deliver a complete tuning workshop for less than the cost of one dyno day. Whether you have a piggy-back fuel controller, race carb, aftermarket ECU, ODB-II tuning software, or a flash/chip programmer, an LM-2 is the tool you need to dial in maximum HP. The meter's award-winning digital signal processing technology provides data on exactly how rich or lean an engine is running at any load. The LM-2's self-calibrating circuitry also compensates for changes in temperature, altitude, and sensor condition.

  • Patented "Direct Digital" Wideband Technology
  • Wideband O2 Compatible with ALL fuel types
  • Single or Dual Channel Version Available
  • OBD-II Scan tool- read/clear DTCs and log up to 16 channels of CAN OBD-II Data
  • Playback log data on screen and/or with powerful LogWorks software (included)
  • Large high-contrast graphics LCD
  • Built-in RPM converter (direct frequency or with optional inductive clamp)
  • 4 fully-differential analog inputs
  • 2 configurable linear analog outputs
  • Positive lock connectors for all connections
  • Innovate MTS serial IN and OUT
  • USB connection to your PC
 

The LM-2 also features two fully programmable linear analog outputs to connect to analog gauges, dyno computers, ECUs, piggyback controllers, and other devices with analog inputs. Analog output 1 comes setup from the factory ready for narrowband simulation; analog output 2 is configured as 0 volt = 7.35 AFR and 5 volts = 22.39 AFR. With the provided LM Programmer software these analog outputs may also be configured by the user.

 

Installation and Setup:

Installation is relatively simple. Complete documentation is supplied, and the support pages, user forum, videos application notes and tuner resources can also speed you on your way to effective tuning. Innovate also has a great network of local dealers, tuners, race shops, and dyno shops that can assist you in choosing, installing, and getting the most out of your Innovate products.

 
Write Your Own Review
You're reviewing:Innovate LM-2 Single Channel Wideband Handheld meter with OBDII
Your Rating
Customer Questions
What does the LM-2 (basic) Single Channel Wideband W/ OBDII offer?
The LM-2 combines an air/fuel ratio meter, a full-function 32-channel datalogger, and powerful software to deliver a complete tuning workshop for less than the cost of one dyno day.
What features does the LM-2 offer for tuning purposes?
The LM-2 offers features such as Patented 'Direct Digital' Wideband Technology, compatibility with ALL fuel types, OBD-II scan tool functionality, large high-contrast graphics LCD, and more.
How is the LM-2 installed and set up?
Installation is relatively simple with complete documentation provided. Innovate also offers support pages, user forums, videos, application notes, and tuner resources to assist in effective tuning. Local dealers, tuners, and dyno shops can also provide assistance.
Which MAP sensor and EGT probes can I use with Innovate LM-2 / TC-4?
For MAP we often use the AEM 50 PSIa (3.5 bar) stainless sensor kit 30-2130-50 connected to an analog input. The AEM K-type closed-tip thermocouple is a compatible, lower-cost EGT probe for the Innovate TC-4. NTC temperature sensors can be read on an analog input, but you need to add a resistor (voltage divider) so the sensor gives a voltage signal. If a signal can swing negative, add a diode on the input so only positive values are read.
My Innovate gauge stopped working. How do I get it replaced under warranty?
Send us the gauge/controller for testing and replacement. In the EU the legal warranty is 2 years, and we honour it even if the manufacturer's standard warranty is 1 year. The O2 sensor is not covered. Before shipping, remove the O2 sensor from the exhaust: a sensor left in the exhaust without its controller heating it will be damaged by soot and condensation. Contact us first for the return address and RMA.
How can I log several sensors (AFR, temperatures, pressures, RPM) on a laptop?
The Innovate Motorsports modular system is the simplest solution. The basic parts are the LM-2 wideband meter (SKU 3806), the TC-4 Plus 4-channel thermocouple amplifier for EGT/temperatures (SKU 3915) and the SSI-4 Plus 4-channel interface for 0–5 V sensors such as pressure sensors and RPM (SKU 3914). All devices daisy-chain together and the free Innovate software records, displays and analyses the data on a computer. Depending on your sensors you may need extra connection wires.
Can I use the Innovate LM-2 with Windows, see live data on my PC and log OBDII channels?
Yes to all. The included Innovate software (LogWorks/LM Programmer) runs on Windows (32- and 64-bit). You can view data live on the PC, and the LM-2 can log OBDII channels, but when logging many OBDII channels the sample rate is slow because of the OBDII protocol speed.
Can I log an AC or negative-going sensor signal (e.g. inductive RPM sensor on a diesel pump) with Innovate LM-2 analog inputs?
Innovate analog inputs read 0–5 V DC. You can connect such a signal, but add a diode on the input so only the positive half of the signal is read; otherwise the negative voltage may cause wrong readings.
I only want to check whether my carburettor is running lean or rich. Do I need the LM-2?
No. The LM-2 is mainly for logging during real driving. If you only need to check the mixture from time to time to adjust the jets, an MTX-L Plus wideband gauge is enough and more affordable.