Inductive Ignition Units
| Code | Description | Version | Connector Specs | Image |
|---|---|---|---|---|
| TCI |
Single Channel Simple Ignitor Speed-dependent advance regulation Ideal for 2, 3, 4 & 6-cylinder carbureted bikes |
-- | -- |
|
| TCIP4 |
Four Channels Programmable Ignition Advance regulation by RPM & TPS Includes Quickshifter input & servo output |
v.96 |
Color: White Connector: Counterpart Pins: 20-pin PC Connection: Serial |
|
| Honda TCI |
Programmable Inductive Ignition Direct drop-in replacement unit Specifically tuned for 90s Honda models |
-- | Connector: Bike specific |
|
| TCIP4-R3 |
Four Channels Competition Ignition Advanced race logic (Launch Control & N2O) Fully tunable timing maps via PC software |
v.104 |
Color: Grey Connector: JAE MX23A Pins: 34-pin |
|
Capacitive Ignition Units
| Code | Description | Version | Connector Specs | Image |
|---|---|---|---|---|
| DCCDI |
Single Channel Simple Ignitor Electronic RPM advance control Replaces fragile HV stator coils on 1-cyl bikes |
-- | -- |
|
| DCCDIP |
Single Channel Programmable Ignition Configurable blocking & side stand inputs Supports 2-stroke engines & CKPS pickup |
v.109 | PC Connection: Serial |
|
| DCCDIP1 race |
Single Channel Competition Ignition Dual advance maps & rev-limiter control Powers via 12V battery or AC stator |
v.106 |
Color: Black Connector: JAE MX23A Pins: 34-pin PC Connection: USB |
|
| DCCDIP2 |
Dual Channel Programmable Ignition Advance regulation by RPM & TPS Outputs for shift light, tacho & fuel relay |
v.105 |
Color: Grey Connector: Counterpart Pins: 20-pin PC Connection: Serial |
|
| DCCDIP2 race |
Dual Channel Competition Ignition Advanced racing functions & dual maps Waterproof sealed casing & racing logic |
v.107 |
Color: Black Connector: JAE MX23A Pins: 34-pin |
|
| DCCDIP4 |
Four Channels Competition Ignition Full multi-channel capacitive control Built-in race functions & servo drivers |
v.108 |
Color: White Connector: Counterpart Pins: 20-pin |
|
⚡ What are Ignitech "Race" Functions?
Ignitech units designated as Race versions include additional hardware inputs, outputs, and advanced firmware capabilities designed specifically for track and competition setups:
Quickshifter (Clutch Master)
Allows full-throttle clutchless upshifts by momentary ignition cut when a shift sensor is triggered.
Start / Launch Limiter
A dedicated secondary rev-limiter activated via handlebar switch for optimized race launches off the line.
Dual Switchable Maps
Store two independent timing curves (e.g., Rain/Dry or Fuel Octane) and switch between them on the fly.
Gear Shift Light Output
Programmable high-current output to drive an external shift lamp or warning light at target RPM.