AEM Universal Adjustable Fuel Pressure Regulator 20-150 PSI

Share
Black. Inlet: 2 X -6 (9/16-18) Outlet: -6 (9/16 inch-18) Gauge Port: 1/8 inch NPT
Rating:
100% of 100
In stock
Barcode
840879020033
SKU
25-302BK
174.00€ 140.32€

The fuel pressure regulator operates at 20-150 PSI or 1.37-10 BAR.

AEM's Universal Adjustable Fuel Pressure Regulator is capable of supporting enough fuel flow for engines up to 1000 horsepower. Our patented interchangeable discharge ports enable the regulator's output to match the output of any fuel pump. Our universal fuel pressure regulator is tapped to accept a -6 AN, or 9/16"x18 fittings and includes a 1/8 NPT port for a fuel pressure gauge or pressure sensor pick up. 

Adjustable Fuel Pressure Regulators

  • Adjustable from 1.37 BAR to maximum fuel pump capacity
  • Interchangeable discharge ports match regulator output to output of any fuel pump
  • CNC-machined from 6061-T6 billet aluminium

AEM Universal Adjustable Fuel Pressure Regulator

AEM billet aluminium adjustable pressure regulator.

The AEM universal adjustable regulator bolts directly to any high volume fuel rail. It is CNC machined from 6061 T-6 aluminium. The fuel outlet and inlet ports are tapped to 9/16-18 thread, which allows the use of several different hoses.  The vacuum reference is 1 to 1 ratio so for every pound of boost on a turbocharged or supercharged application yields a 1-pound rise in fuel pressure. The range of adjustability is form 1.37 BAR   to the maximum the fuel pump can deliver.

A unique feature of the AEM adjustable pressure regulator is that the discharge port in the regulator is changeable. This allows the user to tailor the regulator return volume to match their fuel pump. A common problem is that occurs when using a fixed orifice in a “universal” regulator is that the fuel pressure cannot be effectively controlled when the fuel pump volume is significantly higher than stock. In the case of too small of a discharge orifice, there is a large pressure spike associated with rapid deceleration because the orifice cannot flow enough fuel when the diagram is fully deflected to the open position. This causes the momentary rich condition, which may lead to a rough idle quality until the pressure stabilizes. Conversely if the discharge orifice is too large the adjustment is difficult because the response of the fuel flow out of the orifice is too rapid which makes the adjustment screw too sensitive. The AEM regulator is packaged with three orifices sizes 100 inch, 150 inch and 200 inch. They are easily changed by removing the diaphragm and simply unscrewing the orifice and replacing it with the desire size orifice. The size range provided with the kit is enough to cover any pump from the stock of Honda pump to the largest aftermarket pump available. The replaceable orifices are color coded for easy identification

Write Your Own Review
You're reviewing:AEM Universal Adjustable Fuel Pressure Regulator 20-150 PSI
Your Rating
Customer Questions
What is the adjustability range of the AEM Adjustable Fuel Pressure Regulator?
The AEM Adjustable Fuel Pressure Regulator is adjustable from 1.37 BAR to the maximum fuel pump capacity.
What material is the AEM Adjustable Fuel Pressure Regulator made of?
The AEM Adjustable Fuel Pressure Regulator is CNC-machined from 6061-T6 billet aluminium.
What is the unique feature of the AEM Adjustable Fuel Pressure Regulator?
A unique feature of the AEM Adjustable Fuel Pressure Regulator is the interchangeable discharge ports that allow the user to tailor the regulator return volume to match their fuel pump.