APR Catch Can - Universal (EA113 PCV Block Off Plate and Fittings Only)
Designed for the DIY installers, the universal APR Catch Can System Block Off Plate is designed for use on vehicles where APR does not sell an application specific Catch Can System. The APR Oil Catch Can System traps excessive crankcase oil vapors and gunk from entering the engine. This helps to reduce carbon buildup on intake valves, octane lowering oil vapors and oil pooling in the intake tract. This plate is used to replace the PCV and adapt a can in any configuration you can dream up.
The Problems
An engine produces extreme pressures within its cylinders during operation and some ultimately slips by the piston rings and pressurizes the engine’s crankcase. This is exacerbated when increasing horsepower and driving harder.
To relieve the pressure, the engine uses a failure prone PCV system that dumps the pressure, along with oil vapors, back into the intake tract to be consumed by the engine. Unfortunately, this results in the following performance robbing scenarios:
- Oil vapors mix with the air/fuel mixture, which reduces octane and hurts performance.
- Carbon builds up on the back of intake valves, which reduces airflow and hurts performance.
- Messy oil pools in the intake tract and coats the intercooler, leading to hose degradation, and reduced IC effectiveness.
- The factory PCV system can fail, creating a massive boost leak that directly pressurizes the crankcase.
The Solution
The APR Oil Catch Can System eliminates the factory PCV valve with a billet-aluminum block-off plate. The plate routes crankcase gasses through the APR catch can, which filters oil vapors through a track-proven four-staged baffling system. The vapors pool in the bottom of the can, while the rest of the pressure is diverted back to the intake tract where it’s burned off by the engine.
The result is simple:
- A cleaner engine
- Better performance
- Elimination of a common failure point
System Overview
