AEM Infinity-506/508 Honda/Acura PNP Jumper Harness
The Infinity ECU for manual transmission equipped 1999-01 B/D/H Series Honda/Acura OBDIIb racing engines (Infinity-506 PN 30-7106 and Infinity-508 PN 30-7108) includes an engine-specific start-up calibration and connects to the engine via a Plug & Play harness that is sold separately (PN 30-3509).
Complete Stand Alone Engine Control
The Infinity ECU combines with the Plug & Play harness to replace the factory ECU. It controls all of the engine functions and the Plug & Play wiring harness adapter eliminates the need for cutting and splicing wires.
Plug & Play Harness with Expansion Port
AEM’s sealed, weatherproof Plug & Play harness (sold separately) includes a Lambda connector, an AEMnet connector for communication with other AEMnet enabled devices and an auxiliary connector with a Deutsch DTM 12P connector for adding common aftermarket sensors. Visit the "Features" tab for more information about the Honda B/D/H OBDII Plug & Play harness expansion port.
Coil-On-Plug Ready Adapter Harness for OBDI/OBDII B/D/H
The ignition coil Deutsch connectors on Honda/Acura OBDII B/D/H adapter harnesses enables racers to easily convert their race engine to coil-on-plug without having to modify the ECU’s connector or make any changes to the jumpers in the ECU. For racers who are still running a distributed ignition, an ignition coil adapter is available that plugs into the ignition coil Deutsch connector (PN 30-3501-00, sold separately).
The Infinity EMS delivers high-end engine control for the racing masses at a fraction of the cost. The Infinity-506 and -508 for Honda B/D/H OBDI race engines is even more affordable than its larger -708 and -710 version because it is designed for smaller racing engines using low impedance injectors up to 6 cylinders or race engines driving up to 8 high impedance injectors. It features a smaller footprint than the Infinity-708/-710 (5.855” x 5.55” x 1.8”) and a single, weatherproof 80-pin connector. Built around a latest-generation 200MHz automotive processor, all Infinity systems are capable of processing 400 MIPS (millions of instructions per second).
Features AEM Infinity-506/508 Plug & Play:
- Airflow model based (VE) tuning
- ECU Set Up Wizard simplifies start up
- Flex Fuel compatible
- Multi fuel capable
- Drive by wire
- Variable valve control
- Multiple boost control strategies
- Nitrous control
- Map switching (on-the-fly)
- Internal wideband UEGO air/fuel controller
- Dual knock sensing circuits
- Data logging up to 64 GB
- Outputs to 3rd party dashes and loggers
- Industry leading transfer speed
- Integrated engine protection strategies
- Sealed enclosure and IP67-rated comms ports
WARNING:
This installation is not for the tuning novice! Use this system with EXTREME caution! The AEM Infinity Programmable EMS allows for total flexibility in engine tuning. Misuse or improper tuning of this product can destroy your engine! If you are not well versed in engine dynamics and the tuning of engine management systems DO NOT attempt the installation.
All supplied AEM calibrations, Wizards and other tuning information are offered as potential starting points only. IT IS THE RESPONSIBILITY OF THE ENGINE TUNER TO ULTIMATELY CONFIRM IF THE CALIBRATION IS SAFE FOR ITS INTENDED USE. AEM holds no responsibility for any engine damage that results from the misuse or mistuning of this product!
