MSD Multiple Spark Plug Coil for LS2/LS7 Engines

Share
Maximize Performance with Multiple Spark Plug Coil for LS2 and LS7 Engines
Rating:
100% of 100
In stock
Barcode
085132082872
SKU
8287
159.00€ 128.23€

MSD Ignition’s Multiple Spark Coils (MSC) will fit in place of the stock Gen-III GM coils and connect directly to the factory connec­tors. Once installed, you’ll have the power and performance of higher energy sparks, crowned with MSD’s multiple spark discharge. Increased spark energy and voltage, along with multiple spark capabilities, help improve the combustion process of the fuel mix­ture to create an efficient burn. This results in improved throttle response, smooth idle and quick starts, plus increased high rpm performance!There are two types of housings for the MSD Coils. Check your ap­plication for the visual match.

Caution!
Ignition coils that their shape is deformed cannot be replaced under warranty. In case the body of the ignition coil has split out resin it also cannot be replaced under warranty.

Caution for RX8 owners!
Dear RX8 Owner, remember to disconnect the ignition coil whenever you are doing compression test. Disconnect the ignition coil from the 5-wire or 4-wire connector. Otherwise the ignition coil will be destroyed and there will be no warranty.

Features

  • Improved spark energy and voltage output
  • Patented winding design and materials
  • Direct bolt-in to factory connectors
 
Coil Specs @ 14 Volts
Turns ratio: 58:1
Primary resistance: .48 OHMs
Secondary resistance: 2.2K OHMs
Inductance: 1.9 mH
Peak Current(mA): 124 mA
Spark Duration (ms): 833 us
Energy (mJ): 70 mj
Maxime Voltage: 40 KV
 
Write Your Own Review
You're reviewing:MSD Multiple Spark Plug Coil for LS2/LS7 Engines
Your Rating
Customer Questions
Can deformed ignition coils be replaced under warranty?
No, ignition coils that are deformed cannot be replaced under warranty. If the body of the ignition coil has split out resin, it also cannot be replaced under warranty.
What caution should RX8 owners be aware of?
Dear RX8 Owner, remember to disconnect the ignition coil whenever you are doing a compression test. Disconnect the ignition coil from the 5-wire or 4-wire connector to avoid destroying the ignition coil and voiding the warranty.
What are the features of the ignition coils?
The ignition coils feature improved spark energy and voltage output, patented winding design and materials, and direct bolt-in compatibility with factory connectors.
What are the specifications of the ignition coils at 14 Volts?
Turns ratio: 58:1, Primary resistance: 0.48 OHMs, Secondary resistance: 2.2K OHMs, Inductance: 1.9 mH, Peak Current: 124 mA, Spark Duration: 833 us, Energy: 70 mJ, Maximum Voltage: 40 KV.