Accel E-Spark Distributor

Upgrade Your Engine Performance with E-Spark Distributor

In stock

Barcode

743047115503

SKU

A556

898.89€ 724.91€

The A556 utilizes a stock style mechanical advance unit combined with our rugged E-Spark optical module and billet shutter wheel. These distributors are compatible with both kick start and electric start applications and can be installed without any engine disassembly when used with stock cylinders and heads. Note: Must use carbon core spark plug wires, do not use copper core.

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Details

E-Spark DistributorThe A556 utilizes a stock style mechanical advance unit combined with our rugged E-Spark optical module and billet shutter wheel.

General Information

Any coil or combination of coils with a total primary resistance of at least 2.0 ohms can be used with this distributor. We recommend a 2-3 ohm coil for racing and a 3-4 ohm coil for street use. A coil with 4-5 ohms resistance may be used. However, performance may be reduced, even in street applications. NOTE: Check the charging system and make sure that it is producing no more than 16 volts.

We recommend a spark plug gap of .040” when using a 2-3 ohm coil. A gap of .030” is recommended when using a 3-4 ohm coil.

An optional spring kit (PN 29014) is available for this distributor. The kit gives you a choice of 14 different advance curve settings

Manual

Reviews

Write Your Own Review

FAQ(3)

Customer Questions

What type of coils can be used with the A556 distributor?

Any coil or combination of coils with a total primary resistance of at least 2.0 ohms can be used with this distributor. We recommend a 2-3 ohm coil for racing and a 3-4 ohm coil for street use. A coil with 4-5 ohms resistance may be used. However, performance may be reduced, even in street applications. NOTE: Check the charging system and make sure that it is producing no more than 16 volts.

What spark plug gap is recommended for different coil resistances?

We recommend a spark plug gap of .040” when using a 2-3 ohm coil. A gap of .030” is recommended when using a 3-4 ohm coil.

Is there an optional spring kit available for the A556 distributor?

An optional spring kit (PN 29014) is available for this distributor. The kit gives you a choice of 14 different advance curve settings.