Defi Blue Defi Advance BF Fuel Pressure Gauge 60mm 6Bar

On this page, you are looking at the Defi Advance BF Fuel Pressure Gauge. This particular gauge is 60mm in size and reads up to 6.0 BAR in pressure. This is a great way to monitor the fuel pressure in your vehicle. This gauge will come provided with the fuel pressure sensor, all the required wiring, gauge cup, and hardware to make it ready for the installation. It will also come with the option of having white LED lighting.

Note that the Defi-Link Advanced Control Unit is required when running any Defi Advanced Series Gauges. The Advanced Control Unit will allow for peak hold, warning, record, playback, as well as illumination and control features.

Specifications

Summary

Defi-Link Meter ADVANCE BF is gauge series that need to be connected to Defi-Link ADVANCE Control Unit.

ADVANCE BFs are electronic blacked out gauges which are high response and refined design. When the car is off they have a black face with no numbers on them. As soon as the car is turned on, the gauges light up and are in full effect.

• *Defi-Link ADVANCE Control Unit (sold separately) is necessary to operate BF gauges.
• *Defi-Link Meter ADVANCE BF is expressed as ADVANCE BF or BF gauges.

• Turbo/boost/in-mani, oil press, fuel press, oil temp, water temp, exhaust temp, and tachometer are available.
• USDM models (Imperial unit) and JDM models (SI unit) are available.
• Illumination color: JDM models are white, amber red, and blue (The illumination color cannot be changed). USDM models are amber red.
  
• Size: all kinds of 60mm gauges and 80mm tachometer
• One ADVANCE Control Unit operates up to 7 gauges or displays in total.

Main specifications, functions, and features

• ADVANCE System
• ADVANCE Control Unit necessary
• Commercial attachment necessary
• Stepping motor: STS26/VS2
• Illumination color: white/amber red/blue (in USDM models, only amber red is available)
• Illumination ON/OFF: interlocked with vehicle illumination switch
• LED illumination
• Indicator output
• Built-in indicators
• Driving data can be recorded & replayed
• Opening mode/Ending mode
• Size: 60mm/80mm tachometer
• The applicable number of cylinders: 1, 2, 3, 4, 5, 6, and 8
• Mounting bracket attached

• *The illumination would be automatedly dimmed by connecting to ADVANCE ZD.

Features

• An interactive communication advanced system is implemented.
• Gauges can be controlled from distance with the included switch unit.
• Flat glass and precise graduation scale give more needle accuracy and high visibility.
  
• Opening and closing modes can be selected from 2 variations.
• The installation of additional gauges is easy. Just connect it with the other two gauges and attach the wire to Advance Control Unit.
• The illumination color can be chosen from white, amber red, and blue.
  *The illumination color cannot be changed.
  
• The light-emitting gauge always provides clear visibility with high contrast.(The brightness is 200% compared to existing models.)
  
• The needle pointer driven by the original stepping motor has a smooth instantaneous response to the rapid acceleration of high-performance vehicles.
• Brightness can be adjusted by selecting from five levels for daytime and nighttime separately.(nighttime dimming cancellation function is available.)
• The microcontroller calibrates up to a 270-degree angle in 3027 – 4600 segments (0.088°- 0.059°), and provides accurate vehicle information.
• The self-diagnosis system turns the warning LED on to indicate any wire disconnection, short circuit, and serial communication errors.
• Warning by buzzer sound when the warning LED is on (buzzer sound can be turned on / off).
  
• Peak value and warning value during driving are stored. Driving data can be stored and replayed up to 3 minutes.
• A mounting bracket, meter cup, regular position bezel are provided with this product.
• With both fuel pressure gauge and turbo installed, differential pressure can be monitored on the fuel pressure gauge screen.

Specifications

Size

60mm series

*When Regular Position Bezel is attached
Regular Position Bezel is not included in the package of ADVANCE BF.

80mm Tachometer

Other specifications

Lineup

ADVANCE BF Lineup

ADVANCE BF is available in Imperial units(PSI, deg F) and SI units(kPa, deg C).

White, red, and blue illumination colors are available in SI units. The illumination color cannot be switched. Only red is available in USDM series.

Pictures may differ from the real products by processes and photography conditions, etc.

The gauge diameter is 2 3/8in (60mm). 3 1/8in (80mm) tachometer is also available.

ADVANCE　System connection

The Defi-Link ADVANCE system allows gauges and displays to be attached to the ADVANCE control unit with a single “DAISY CHAIN” wiring system.
ADVANCE gauges, displays, and Control Unit are equipped with microcomputers. Distant gauges and displays can be operated at hand.

The system is also designed to allow all sensors to be attached to the ADVANCE control unit, so that gauges and displays can be mounted separately without the need for multiple tubing or wiring to each gauge.

• *ADVANCE System (from 2009) and Defi-Link System (from 1998) are not compatible. Control unit and sensor wires for Defi-Link System cannot be used for ADVANCE System except some common sensors and extension wires.
• *To operate ADVANCE gauges and displays, ADVANCE Control Unit is necessary.

Wiring diagram

• ※One Control Unit can control up to 7 ADVANCE gauges & displays in all. (except DSDF)
• ※All the gauges(&displays) can be connected to both Meter Output connectors.
• ※Different color gauges can be connected.
• ※The same variety of gauges cannot be connected. (Ex. Two turbo gauges cannot be connected.)
• ※More than 2 Displays(ZDs) can be connected.
• ※Gauges(& displays) can be connected in any order.
• ※Smart Adapter and DSDF need to be connected to the end of the meter line because they have only one connector for meter wire.

Components