Defi Advance BF Blue Boost Metric 60mm Gauge w/ Control Unit

Share
Blue Boost Pressure Gauge 60mm 2.0 BAR, Control Unit
In stock
SKU
DF11406
$362.00 $291.94

Racedom is proud to supply the car enthusiast with a large selection of Defi Gauges and Defi Control Units. Defi Gauges have been the number one choice for aftermarket gauges that are utilized by those who participate in all varieties of motorsports that include drifting, drag racing, time attack, and circuit racing. They are known best for their quick operation, and both fit and finish. Choose the right gauge that will suit your application.

On this page, you are looking at the Defi Advance BF White Boost Pressure Gauge with the Defi-Link Advanced Control Unit. This particular gauge is 60mm in size and reads up to 2.0 BAR in pressure. This is a great way to monitor the boost pressure in your vehicle. This gauge will come provided with the boost pressure sensor, all the required wiring, gauge cup, and hardware to make it ready for the installation.

Note that the Defi-Link Advanced Control Unit is required when running any Defi Advanced Series Gauges, and WILL BE INCLUDED IN THIS KIT! The Advanced Control Unit will allow for peak hold, warning, record, playback, as well as illumination and control features.

Specifications

  • Brand: Defi
  • Gauge Face Color: Black
  • Gauge Needle Color: Red
  • Gauge Sending Unit: Electrical
  • Gauge Size: 60mm
  • Gauge Type: Boost/Vacuum
  • Requires Control Unit: Yes (Included)
  • Units: Metric

Up to 7 gauges and displays can be connected and controlled by this one unit. Defi daisy chain system into this control unit makes wiring and setting up your gauges simple and clean. Driving data can be stored and played back from up to 3 minutes with play, pause, forward, and rewind functions during initial playback. This is a unit that must be purchased along with any Defi-Link gauges that require the Advanced System.

New features of the 7703

  • Not only minimum values but also maximum values can be displayed in peak modes of oil pressure and fuel pressure.
  • The illumination of the switch unit is automatically turned on/off if ADVANCE ZD is installed.

This unit will not work with older Defi BF gauges or the Racer series.

Features of this gauge include:

  • Stepper motor offers an accurate and quick response to changing inputs
  • Brightness can be controlled by 5 different levels for daytime and nighttime.
  • Peak and warning values are stored for up to 3 minutes of replay data.
  • Mounting bracket, meter cup, and regular position bezel are included with gauges.

New features of this gauge:

  • Increased LED brightness, twice the lighting compared to previous versions
  • Buzzer sounds when the Warning LED is on.  ( this feature can be turned off)
  • Separate Warning and Peak Indicators on the gauge face.
  • The face does blackout when the gauge is turned off ( like the Defi-Link Meter BF).
  • The self-diagnosis system turns the warning LED to indicate any short circuit, wire disconnection, or other errors.

All Advance BF Gauges require the use of the Defi Link Advance Link System.  Only 1 system is required and can control up to 7 gauges.  This will NOT work with the older Defi Link System that does not state Advanced.

Summary

Defi-Link Meter ADVANCE BF is gauge series that need to be connected to Defi-Link ADVANCE Control Unit.

ADVANCE BFs are electronic blacked out gauges which are high response and refined design. When the car is off they have a black face with no numbers on them. As soon as the car is turned on, the gauges light up and are in full effect.

  • *Defi-Link ADVANCE Control Unit (sold separately) is necessary to operate BF gauges.
  • *Defi-Link Meter ADVANCE BF is expressed as ADVANCE BF or BF gauges.
  • Turbo/boost/in-mani, oil press, fuel press, oil temp, water temp, exhaust temp, and tachometer are available.
  • USDM models (Imperial unit) and JDM models (SI unit) are available.
  • Illumination color: JDM models are white, amber red, and blue (The illumination color cannot be changed). USDM models are amber red.
    ADVANCE BF illumination color
  • Size: all kinds of 60mm gauges and 80mm tachometer
  • One ADVANCE Control Unit operates up to 7 gauges or displays in total.

Main specifications, functions, and features

  • ADVANCE System
  • ADVANCE Control Unit necessary
  • Commercial attachment necessary
  • Stepping motor: STS26/VS2
  • Illumination color: white/amber red/blue (in USDM models, only amber red is available)
  • Illumination ON/OFF: interlocked with vehicle illumination switch
  • LED illumination
  • Indicator output
  • Built-in indicators
  • Driving data can be recorded & replayed
  • Opening mode/Ending mode
  • Size: 60mm/80mm tachometer
  • The applicable number of cylinders: 1, 2, 3, 4, 5, 6, and 8
  • Mounting bracket attached
  • *The illumination would be automatedly dimmed by connecting to ADVANCE ZD.

Features

  • An interactive communication advanced system is implemented.
  • Gauges can be controlled from distance with the included switch unit.
  • Flat glass and precise graduation scale give more needle accuracy and high visibility.
    ADVANCE BF
  • Opening and closing modes can be selected from 2 variations.
  • The installation of additional gauges is easy. Just connect it with the other two gauges and attach the wire to Advance Control Unit.
  • The illumination color can be chosen from white, amber red, and blue.
    *The illumination color cannot be changed.
    ADVANCE BF illumination color
  • The light-emitting gauge always provides clear visibility with high contrast.(The brightness is 200% compared to existing models.)
    ADVANCE BF vs Defi-Link Meter BF
  • The needle pointer driven by the original stepping motor has a smooth instantaneous response to the rapid acceleration of high-performance vehicles.
  • Brightness can be adjusted by selecting from five levels for daytime and nighttime separately.(nighttime dimming cancellation function is available.)
  • The microcontroller calibrates up to a 270-degree angle in 3027 – 4600 segments (0.088°- 0.059°), and provides accurate vehicle information.
  • The self-diagnosis system turns the warning LED on to indicate any wire disconnection, short circuit, and serial communication errors.
  • Warning by buzzer sound when the warning LED is on (buzzer sound can be turned on / off).
    ADVANCE BF peak and warning LED
  • Peak value and warning value during driving are stored. Driving data can be stored and replayed up to 3 minutes.
  • A mounting bracket, meter cup, regular position bezel are provided with this product.
  • With both fuel pressure gauge and turbo installed, differential pressure can be monitored on the fuel pressure gauge screen.

Specifications

Size

60mm series

ADVANCE BF size

Unit: mm/inches
Gauge size 60mm 2 3/8″
A 66.3 2.3
B 52.2 2.06
C 15.5 0.6
D 68.6* 2.7*
E 17.8* 0.8*
F 70.5* 2.77*
G 77.6 to 79.1* 3.05 to 3.1*
H 15 degrees*
I 32 degrees*

*When Regular Position Bezel is attached
Regular Position Bezel is not included in the package of ADVANCE BF.

 

Quick Info

  • For Advance BF & CR Gauges

  • 1 Unit Required

  • Run up to 7 Gauges

Summary

Defi-Link ADVANCE SYSTEM is the next generation system that adopted interactive communication.

Defi-Link ADVANCE Control Unit is necessary to operate ADVANCE gauges and displays.

Part No. DF07703 (From February, 2012) / DF07701 (End of life in December, 2011)

*Defi-Link ADVANCE Control Unit is expressed as ADVANCE Control Unit or ADVANCE unit.

Main specifications, functions, and features

  • ADVANCE System
  • Necessary for ADVANCE gauges and displays
  • Switch unit attached
  • Driving data can be recorded & replayed
  • Illumination ON/OFF: interlocked with vehicle illumination switch
  • Illumination color: White (switch)
  • Indicator output

Features

  • An interactive communication advanced system is implemented.
  • ADVANCE Control Unit can control up to 7 Defi-Link Meter ADVANCE CRs and ADVANCE BFs all in at a time. (Ex. 4 ADVANCE CRs and 3 ADVANCE BFs)
  • Gauges can be controlled from distance with the included switch unit.
    switch illumination
  • Opening and closing modes can be selected from 2 variations.
  • The installation of additional gauges is easy. Just connect it with the other two gauges and attach the wire to Advance Control Unit.
  • The power source indicator (blue LED) assures correct wiring.
  • Warning by buzzer sound when the warning LED is on (buzzer sound can be turned on / off).
  • Peak value and warning value during driving are stored. Driving data can be stored and replayed up to 3 minutes.
  • With both fuel pressure gauge and turbo installed, differential pressure can be monitored on the fuel pressure gauge screen.
  • ADVANCE Control Unit is threadably mountable.

Specifications

The differences between DF07703 and DF07701

<How to recognize the models>

“03” is appeared in the lower right on the front panel of unit: DF07703
Nothing is appeared in the lower right on the front panel of unit: DF07701

difference between 7703 and 7701

<New functions on DF07703 (Functions which are added to 07701)>

    • Not only minimum values but also maximum values can be displayed in peak modes of oil pressure and fuel pressure.
    • The illumination of the switch unit is automatically turned on/off if ADVANCE ZD is installed.

 

Specifications in mm (inches)

ADVANCE Control Unit

ADVANCE unit size

1 Switch unit(white)
2 Speed & Tachometer signal wire(blue)
3 Exhaust temp sensor wire(black)
4 Water temp sensor wire(pink)
5 Oil temp sensor wire(red)
6 Fuel press sensor wire(red)
7 Oil press sensor wire(white)
8 Turbo/In-Mani sensor wire(light blue)
9 Power source wire(beige)
10 Meter wire(white)
11 Meter wire(white)

Switch unit

ADVANCE switch size

Other specifications

Power supply
voltage
10V to 16V DC (12V vehicle only)
Current consumption Maximum during 7 gauges are connected
+B 2A(IGN ON), 5mA(IGN OFF)
ILM 800mA
The applicable number of cylinders 1,2,3,4,5,6,8
Note *Products are for only on vehicles with a 12V electrical system. Never use products on 24V vehicles.
*Products can not be installed in altered vehicles.
*To install pressure gauges or temperature gauges, proper sensor attachments are necessary. The thread sizes of sensors are 1/8PT.

ADVANCE System connection

The Defi-Link ADVANCE system allows gauges and displays to be attached to the ADVANCE control unit with a single “DAISY CHAIN” wiring system.
ADVANCE gauges, displays, and Control Unit are equipped with microcomputers. Distant gauges and displays can be operated at hand.

The system is also designed to allow all sensors to be attached to the ADVANCE control unit, so that gauges and displays can be mounted separately without the need for multiple tubing or wiring to each gauge.

daisy chain

  • *ADVANCE System (from 2009) and Defi-Link System (from 1998) are not compatible. Control unit and sensor wires for Defi-Link System cannot be used for ADVANCE System except some common sensors and extension wires.
  • *To operate ADVANCE gauges and displays, ADVANCE Control Unit is necessary.

Wiring diagram

ADVANCE system

  • ※One Control Unit can control up to 7 ADVANCE gauges & displays in all. (except DSDF)
  • ※All the gauges(&displays) can be connected to both Meter Output connectors.
  • ※Different color gauges can be connected.
  • ※The same variety of gauges cannot be connected. (Ex. Two turbo gauges cannot be connected.)
  • ※More than 2 Displays(ZDs) can be connected.
  • ※Gauges(& displays) can be connected in any order.
  • ※Smart Adapter and DSDF need to be connected to the end of the meter line because they have only one connector for meter wire.

 

Write Your Own Review
You're reviewing:Defi Advance BF Blue Boost Metric 60mm Gauge w/ Control Unit
Your Rating