Aeromotive Brushless In-Line 3.5 Spur Gear Pump with Variable Speed Controller

Variable Speed Controlled Fuel Pump for High Performance Engines

In stock

Barcode

684980010947

SKU

11195

2,131.99€ 1,719.35€

Aeromotive's True Variable Speed Controller offers the advantages of built-in pump speed control via a dedicated 0-5V analog DC input signal. The Controller capitalizes on our existing brushless technology by reducing fuel flow during low engine demand and decreasing an already low current draw, therefore minimizing both motor heat the introduction of environmental via reduced fuel recycling.

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Details

Aeromotive Brushless In-Line 3.5 Spur Gear Pump with Variable Speed Controller

Features

The Pro-Series performance you expect and more:
- Fuel injected engines:
  up to 2400 FWHP â naturally aspirated
  up to 1800 FWHP â forced air induction
- Carbureted engines:
  Up to 2600 FWHP â naturally aspirated
  Up to 2000 FWHP â forced air induction
E85 Compatible, reduce max FWHP by 30%
Lighter than the traditional Pro-Series pump.
Reduced current draw at higher, EFI pressures.
Extended service life in methanol and ethanol.
New integral spur-gear pumping mechanism.
90-PSI continuous operating pressure and up to 150-PSI peak pressure, base plus boost.
Integral, external brushless controller for clean installation, cooler fuel and enhanced reliability.
ORB-12 inlet and ORB-10 outlet ports.
Requires straight 12-VDC to 16-VDC power supply.
Not compatible with pulse modulated systems or fuel pump speed controllers.

EFI Rated flow of 1,250 lbs./hr. @ 40 psi, 13.5 volts
Carb Rated Flow of 1,350 lbs./hr. @ 9 psi, 13.5 volts

Manual

Reviews

Write Your Own Review

FAQ(6)

Customer Questions

What is the maximum power output for fuel-injected engines with the Aeromotive Brushless In-Line 3.5 Spur Gear Pump?

Up to 2400 FWHP naturally aspirated and up to 1800 FWHP forced air induction.

What is the maximum power output for carbureted engines with the Aeromotive Brushless In-Line 3.5 Spur Gear Pump?

Up to 2600 FWHP naturally aspirated and up to 2000 FWHP forced air induction.

Is the Aeromotive Brushless In-Line 3.5 Spur Gear Pump E85 compatible?

Yes, it is E85 compatible, but the maximum FWHP is reduced by 30%.

What are the key features of the Aeromotive Brushless In-Line 3.5 Spur Gear Pump?

The pump is lighter than traditional Pro-Series pumps, has reduced current draw at higher EFI pressures, extended service life in methanol and ethanol, and features a new integral spur-gear pumping mechanism.

What are the operating pressure specifications for the Aeromotive Brushless In-Line 3.5 Spur Gear Pump?

It has a 90-PSI continuous operating pressure and up to 150-PSI peak pressure (base plus boost).

What are the power supply requirements for the Aeromotive Brushless In-Line 3.5 Spur Gear Pump?

It requires a straight 12-VDC to 16-VDC power supply and is not compatible with pulse modulated systems or fuel pump speed controllers.