Aeromotive Brushless A1000 20 Gallon Fuel Cell with Variable Speed Controller

Share
Efficient and Advanced Fuel Management System with Brushless Technology
In stock
Barcode
684980011067
SKU
18381
2,930.99€ 2,363.70€

20-gallon Street/Strip Fuel Cell with Stealth A1000 Brushless Pump, aircraft filler cap, ORB-10 outlet, AN-08 baffled return and dual, roll-over protected AN-08 vents. This is the same fuel cell design, but with larger capacity of 20-gal vs 6-gal used in the Ford Cobra Jet, Chevy COPO Camaro and many of the MOPAR Drag Pack cars.

Aeromotive Brushless A1000 20 Gallon Fuel Cell with Variable Speed Controller

Features

  • Baffled design keeps fuel at the pump inlet
  • Fluted pickup with integrated 100-m prefilter
  • Fuel Cell Dimensions: 20″w x 24″l x 10″h
  • Integral 0-90 ohm fuel level sending unit
  • The A1000 performance you expect and more:
    • Fuel Injected Engines: GAS
      up to 1300 FWHP â naturally aspirated
      up to 1000 FWHP â forced air induction
    • Carbureted Engines: GAS
      up to 1500 FWHP â naturally aspirated
      up to 1200 FWHP â forced air induction
    • Fuel Injected Engines: E85
      up to 910 FWHP â naturally aspirated
      up to 700 FWHP â forced air induction
    • Carbureted Engines: E85
      up to 1050 FWHP â naturally aspirated
      up to 840 FWHP â forced air induction
  • Lighter than the traditional A1000 pump.
  • Reduced current draw at higher, EFI pressures.
  • Extended service life in methanol and ethanol.
  • Integral, external brushless controller for clean installation, cooler fuel and enhanced reliability.
  • Quieter than the traditional A1000 pump.
  • Requires straight 12-VDC to 16-VDC power supply.
  • Not compatible with pulse modulated systems or fuel pump speed controllers.
  • ORB-10 outlet port.

EFI rated flow of 700 lbs./hr. @ 45 psi, 13.5 volts
Carb rated flow of 900 lbs./hr. @ 9 psi, 13.5 volts

Aeromotive’s True Variable Speed Controller offers the advantages of built-in pump speed control via a dedicated 0-5V analog DC input signal. The Controller capitalizes on our existing brushless technology by reducing fuel flow during low engine demand and decreasing an already low current draw, therefore minimizing both motor heat the introduction of environmental via reduced fuel recycling.

Write Your Own Review
You're reviewing:Aeromotive Brushless A1000 20 Gallon Fuel Cell with Variable Speed Controller
Your Rating
Customer Questions
What are the dimensions of the Aeromotive Brushless A1000 20 Gallon Fuel Cell?
The fuel cell dimensions are 20 inches wide, 24 inches long, and 10 inches high.
What is the rated flow for EFI and carbureted engines with this fuel cell?
EFI rated flow is 700 lbs/hr at 45 psi, 13.5 volts. Carb rated flow is 900 lbs/hr at 9 psi, 13.5 volts.
What type of engines is the Aeromotive Brushless A1000 suitable for?
It is suitable for fuel-injected engines running on gas or E85, as well as carbureted engines with varying power levels.
What power supply is required for the Aeromotive Brushless A1000 Fuel Cell?
It requires a straight 12-VDC to 16-VDC power supply.
Is the Aeromotive Brushless A1000 compatible with pulse modulated systems or fuel pump speed controllers?
No, it is not compatible with pulse modulated systems or fuel pump speed controllers.