Innovate Motorsports TC-4 Plus (4-Kanal-Thermoelementverstärker)
Das TC-4 Plus ist 4 Kanaltyp-K-Thermoelement-Verstärkergerät, das ein eigenständiges System oder als Teil eines MTS (modulares Tuning-System) verwendet werden kann. Der TC-4 Plus enthält eine digitale Eingabe/Ausgabe, 4 analoge vollprogrammierbare analoge Ausgänge und ist ideal für Anwendungen wie Dynamometer, Datenerfassungssysteme oder eigenständiges ECUS.
TC-4 Plus 4-Kanal-Sensor-Schnittstelle K-Typ Thermoelement-Verstärker, der 4 Temperatur-Eingänge zu einer MTS-Log-Kette hinzufügt.
Features
- K-Type Thermoelement-Verstärker, der 4 Temperatur-Eingänge zu einer MTS-Log-Kette hinzufügt.
- Temperaturbereich 32-1999 Grad F, 0-1093 Grad C
- 4-Konfigurierbare lineare 0-5V Analogausgänge (einer pro Eingang)
- Der TC-4 PLUS kann zur Messung anderer Temperaturmetriken wie Einlass- und Auslasstemperatur des Ladeluftkühlers und des Katalysators verwendet werden.
Paket beinhaltet
- TC-4 PLUS
- Serielles Programmierkabel
- Molex zu Molex Patch-Kabel (zum Verbinden mit anderen MTS-kompatiblen Geräten)
- Handbuch
Installation und EinrichtungDie Installation ist relativ einfach.
Installation und Einrichtung:
Die Installation ist relativ einfach. Eine vollständige Dokumentation wird mitgeliefert, und die Support-Seiten, das Benutzerforum, Videos, Anwendungshinweise und Tuner-Ressourcen können Ihnen auch dabei helfen, das effektive Tuning zu beschleunigen. Innovate hat auch ein großartiges Netzwerk von lokalen Händlern, Tunern, Rennwerkstätten und Prüfstandswerkstätten, die Ihnen bei der Auswahl, Installation und optimalen Nutzung Ihrer Innovate-Produkte helfen können.
LogWorks Tuning Software (PC) | LM-2 (#3806) |
LM-2 (#3807) |
LC-1 (#3769) |
XD-16 (#3780) |
DL-32 (#3782) |
SSI-4 (#3783) |
TC-4 (#3784) |
LMA-3 (#3742) |
OT-1 (#3790) |
• | • | • | • | • | • | • | • | ||
PC Data Logging- Requires Laptop / PC |
• | • | • | • | • | • | • | • | |
Internal Data Logging |
32-ch., 36+ hours (17 min./MB) |
32-ch., 36+ hours (17 min./MB) |
32-ch., 36+ hours (17 min./MB) |
||||||
Wideband Air/Fuel Ratio (Lambda) | • | • | |||||||
Dual Wideband Air/Fuel Ratio (Lambda) |
• | ||||||||
Analog Outputs | 2 | 2 | 2 | ||||||
Replace Narrowband |
• | • | • | ||||||
Integrated Digital Display |
• | • | • | ||||||
52mm Round Gauge Display |
• | ||||||||
Warning Light | • | ||||||||
Analog Inputs | 4 | 4 | 5 | 4 | 5 | ||||
5V output for Ext. Sensors | • | • | • | • | |||||
RPM | • | • | • | • | • | ||||
Duty Cycle | • | • | • | • | |||||
Freq/Speed | • | • | • | • | |||||
EGT / CHT Thermocouple Amp. |
1 | 4 | 1 | ||||||
Dual-Axis Accelerometer |
• | • | |||||||
MAP Sensor | To 44 psi | To 44 psi | |||||||
OBD-II | • | • |
All Innovate products are completely modular, enabling you to build the perfect tuning system for your needs. The MTS is scalable, and all components share a common digital communications protocol. Here are a few examples of log chains that you might setup to tune in various situations:
Example #1: Log-Chain
This 28-channel example includes an LC-1 on every cylinder, a DL-32 for recording, two TC-4's for exhaust gas temperature (or CHT), an AuxBox (LMA-3) for intake and turbo temp, speedo & TPS, and lastly an XD-16 to monitor a channel in real-time, display warning conditions, and trigger log sessions.
Example #2: Log-Chain of 5 channels consisting of DL-32 alone
Notice the DL-32's input port does not need a terminator plug like some other MTS devices. It can auto-detect if something is plugged into its input port
Example #3: 7-channel Log-Chain example with 2 AFR channels
Notice that the LC-1's are connected BEFORE the first DL-32. LC-1's should always be connected before the first DL-32
Example #4: 17-channel Log-Chain example
The example chain consists of a LM-1/LMA-2, a LC-1, a LMA-3, a DL-32's and 2 XD-16's. In this case the chain has 17 channels (6 from LM-1, 1 from LC-1 and 5 each from the LMA-3 and DL-32).
Devices attached to the LM-1's 'Aux In' port count as being part of the LM-1's 6 channels. They don't count extra. XD-16's do not contribute any channels, so you can add as many as needed.