Turbosmart BOV Kompact Shortie Plumb Back Ford Fiesta ST 1.6L EcoBoost
This little blow-off valve might look small, but it’s anything but light on performance. With its billet aluminium construction and a light-weight brass/aluminium two-piece piston, which is then perfectly matched with precision engineered springs, the Shortie provides razor sharp boost response and significantly greater boost handling abilities, up to a massive 30PSI.
The Plumb Back is a fully recirculating BOV, so its operation is quiet and won’t draw any unwanted attention. It seamlessly integrates with the vehicle’s standard mapping, so it’s perfect for the driver seeking big performance from their ST while keeping under the radar.
Like the Dual Port, the Plumb Back Shortie is a direct replacement for the Fiesta’s standard plastic blow-off valve, which can leak and crack, especially under increased boost pressure. The Shortie is a far more durable replacement, and it bolts right up to the Ford’s turbo compressor cover, letting you turn up your Fiesta’s performance without costly custom work.
Supplied With:
Kompact Shortie Plumb Back BOV, Boost Reference Adapter, All Necessary Plumbing, Resister Pack for Factory Valve Plug.
TURBOSMART BLOW OFF VALVES RANGE
KOMPACT EM UP TO 600HP WITH 28MM PISTON
-
The Kompact EM Series is an evolution of the traditional Kompact Series with full O.E Integration in mind. By working with the factory electronic control strategies of new cars and combining our proprietary on-board bullit valve technology and bullet-proff, billet construction, the Kompact EM Series is a direct replacement & Upgrade for OEM parts.
KOMPACT UP TO 600 HP WITH 28MM PISTON
- The Kompact Series is designed with a focus on quality materials, design, and integration. The Kompact range by Turbosmart gives vehicles the high-performance edge in boost handling capacity, reliability & response. With bullet-proof, billet construction, the Kompact series is a direct replacement & Upgrade for OEM parts.
BOV5 UP TO 800 HP WITH 38MM PISTON
- Designed for high flow and performance. The BOV5 from Turbosmart is well suited for both street and race vehicles. Designed around a 38mm Piston and using our unique boost-balance technology. There’s no amount of boost that will escape this proven classic. The BOV5 line incorporates clever modular design, precision machining and assembly—all Australian made by hand and tested before shipping.
BIG BUBBA UP TO 1500 HP WITH 50MM PISTON
- The Big Bubba is our largest piston style Blow-Off Valve. Designed for large capacity supercharged and turbocharged engines, including turbo-diesels. The Big Bubba range features precision engineering, bigger inlet and outlet ports, hard anodised and lightweight aluminium pistons. It also comes with a solid v-band mounting system.
RACEPORT UP TO 2500 HP WITH 50MM PISTON
- An amazingly small and light BOV for forced induction competition level engines. The Race Port has race-proven results from street, strip and circuit. It features our unique collar design, twin 1/8” NPT pressure ports and internal flow structures. It is 50% lighter and 25% smaller than the competition. At the same time, it is flowing 330 CFM – making it the highest flowing BOV of its type on the market.
PROPORT UP TO 3500 HP WITH 54MM PISTON
- ProPort by Turbosmart is a 54mm (2.13in) Blow Off Valve with a tiny footprint and massive flow. The ProPort flows 420 cfm which is enough for 3500 HP and is in a league of its own standing 30mm (1.2in) lower than PowerPort while flowing over 25% more than the Market leading 50mm Raceport.
POWERPORT OVER 3000 HP WITH 60MM PISTON
- The Power Port is Turbosmart’s largest and highest flowing Blow-Off Valve ever. The Power Port’s massive 2.5inc, inlet, unprecedented valve lift, supersized ports and carefully designed CFD flow paths mean it has more than enough breathing room for even the most powerful turbocharged drag racing engines. The PowerPort also benefits from Twin-Port control for advanced staging & boost control strategies and optional on-board position sensor.
