MSD Power Grid 4-Connector Hub - Black Housing

The 4-Connector CAN-Bus Hub is intended for use with MSD Ignition CAN systems only.

For a CAN system to work properly, it must have definite ends to avoid signal distortion and potential issues like improper timing, false signals, and repetitious signals.

The MSD Power Grid System Controller with an internal network end and the CAN-Bus Terminator (PN 7741) acting as the second end are required at the ends of the CAN-Bus system to prevent signal distortion.

Without the CAN-Bus Terminator, distorted signals may lead to permanent or intermittent issues such as improper timing, false signals, and repetitious signals.

Always make sure to have the MSD Controller and the CAN-Bus Terminator at the ends of the MSD CAN-Bus to prevent signal distortion and ensure smooth operation.