GripOne IMU - Inertial Platform for GRIPONE S3, P3 and Chrono TC

The IMU is an inertial platform optional of GRIPONE S3 and GRIPONE P3 that permit the ECU to activate all the process of 3D-INTELLIGENCE technology. It should be connected close to the mark IM. The positioning of the IMU on the bike is very important. If it is not done in the correct manner, the control unit may not work. The IMU must be positioned (possibly) in the front of the bike and the most possible to the center (not to the right or left). On the IMU you can see two arrows pointing to the Z axis and the axis Y. The Y arrow must point in the direction of motion of the bike (as horizontal as possible). The Z arrow should be pointing the ground (as upright as possible).