Racedom Fiat Punto GT Ignition Upgrade kit Stage 2
The Fiat Punto GT kit refers to all Punto models including GT that have two double ignition coils. This kit will remove the existing ignition system. A brand new and powerful MSD ignition coil will be used in place with spark plug wires. We provide you also the connector that you need for the new coil. The ignition upgrade kit is mandatory for vehicles that the existing ignition system is old, does not attribute the awaited performance or in case the engine has been restored or has been turbocharged, and needs more power to the spark.
The Stage 2 kit adds to the first ignition kit a strong ignition double channel box. The DIS-2 has two channels, to fire two coil packs. Each Control delivers full power Capacitive Discharge sparks from idle through racing rpm. Below 3,000 rpm there is a series of multiple sparks that last for up to 20° of crankshaft rotation to improve idle, starting and throttle response. The adjustable features of the DIS Ignitions have also been upgraded with rotary dials. These provide easier, and more precise adjustments of the overrev limiter and the holeshot rev limit. Also, there is now a step retard that can be wired directly to a nitrous system or switch for activation! The DIS-2 will produce capacitive discharge ignition spark with more than 110 mJoule per spark.
Installation Steps
- Remove the old ignition coil system
- Take the four wires that come up to the coil connector and connect them to the input of the DIS-2
- Choose the place that you will install the coil and install it.
- Connect the coil connector to the DIS-2.
- Plug in the spark plug wires to the coil the cut them to the appropriate length for each cylinder
- Install the spark plug boots
Note: Some of these steps have to be done by an expert.
Kit Contents
- 1 X High Power Ignition Coil
- 4 X Spark plug wires
- 4 X Spark plug boots
- 1 X Coil connector
- 1 X DIS-2 Ignition Box