Dinan Negative Camber Control Arms for BMW 528i 535i 550i 640i 740i 750Li 760Li 650i
Negative Camber Control Arms provide a remarkable reduction of understeer and more immediate turn-in from the M6 by inducing more negative camber on the front wheels. The additional negative camber improves the grip of the front tires in the turns thus reducing the vehicle's tendency to "plow" or "push" the front end for those who drive a bit more aggressively.
Models
- 2011 - 2016 BMW 528i Sedan
- 2011 - 2016 BMW 528i xDrive Sedan
- 2010 - 2017 BMW 535i GT
- 2011 - 2015 BMW 535i Sedan
- 2010 - 2017 BMW 535i xDrive GT
- 2011 - 2016 BMW 535i xDrive Sedan
- 2010 - 2017 BMW 550i GT
- 2011 - 2016 BMW 550i Sedan
- 2010 - 2017 BMW 550i xDrive GT
- 2011 - 2016 BMW 550i xDrive Sedan
- 2012 - 2018 BMW 640i Convertible
- 2012 - 2018 BMW 640i Coupe
- 2012 - 2018 BMW 640i xDrive Convertible
- 2012 - 2018 BMW 640i xDrive Coupe
- 2012 - 2018 BMW 650i Convertible
- 2012 - 2018 BMW 650i Coupe
- 2013 - 2019 BMW 650i Gran Coupe
- 2012 - 2018 BMW 650i xDrive Convertible
- 2012 - 2018 BMW 650i xDrive Coupe
- 2013 - 2019 BMW 650i xDrive Gran Coupe
- 2013 - 2015 BMW 740i Sedan
- 2013 - 2015 BMW 740Li Sedan
- 2009 - 2015 BMW 750i Sedan
- 2009 - 2015 BMW 750i xDrive Sedan
- 2009 - 2015 BMW 750Li Sedan
- 2009 - 2015 BMW 750Li xDrive Sedan
- 2010 - 2015 BMW 760Li Sedan
- 2011 - 2014 BMW Alpina B7 Sedan
- 2011 - 2015 BMW Alpina B7 xDrive Sedan
- 2011 - 2015 BMW Alpina B7L Sedan
- 2011 - 2015 BMW Alpina B7L xDrive Sedan
This increase in negative camber is accomplished in two ways. The shorter front upper control arm increases camber gain, which is the amount of negative camber that is created by the geometry of the suspension as the car rolls to one side. In addition the static negative camber or the amount you will see on your alignment read out is also increased. The combination of static and dynamic camber gain adds an increase in front grip when the tire is loaded.
A quick look at your front tires will tell the story. If you are noticing significant outside edge front tire wear, perhaps even a bit of ''cupping'', you are definitely a candidate for the Negative Camber Control Arms. Not only will the extra camber improve the handling, but you'll also likely notice more even tire wear, assuming you continue to corner aggressively.
Benefits of the Dinan Negative Control Arms:
+ Replaces front upper control arms with ones that increase negative camber by -0.5°
+ Improves grip of front tires
+ Evens out tire wear during aggressive cornering