Dinan Carbon Fiber Cold Air Intake for BMW 335is E92 E93 2011-2013

Share
Improve air-flow utilizing the stock ram-air
Out of stock
Barcode
813725022086
SKU
D760-0031
2,507.00€ 2,021.77€

As boost is increased through the use of performance software, the single factory intake becomes restrictive and the engine is lacking the air it needs to make maximum power. Our cold air intake force feeds the 3 liter turbocharged inline 6 with greater volumes of cool, oxygen rich air for substantial power gains by utilizing our secondary carbon fiber intake. The system is so effective that the carbon fiber inlet air temperature is a full 40 degrees Fahrenheit cooler than the incoming air from the stock inlet.

Due to the increased airflow from our intake, the power-curve is extended into the higher RPM’s for a noticeable change. The system is a direct replacement for the factory air box lid, employing a hand-crafted carbon fiber unit that also includes a secondary carbon fiber intake tube that captures cool air from the lower grill and includes the shielding for the conical filter to insulate it from power robbing engine compartment heat.

Horsepower is increased by +14 Hp @ 6000 rpm and Torque is increased by +16ft-lbs @ 3400 rpm with Dinan Stage 3 Software, DINAN Intercooler and Free Flow Exhaust.

Special Note: This kit requires the deletion of the auxiliary radiator in the front left of the car. A Dinan High Capacity Oil Cooler is required to maintain adequate engine cooling and warranty coverage.

Stage 2 software, Free Flow Exhaust produces 12 Hp and 13 ft-lb torque Stage 1 software, Free Flow Exhaust produces 9 Hp and 10 ft-lb torque.

Completely Stock car produces 5 Hp and 6 ft-lb torque.

Models

  • 2011 - 2013 BMW 335is Convertible
  • 2011 - 2013 BMW 335is Coupe

Product Specifications

Emission Status This product is in compliance with U.S. EPA Memorandum 1A, or this product has not been found, nor is believed to be, unlawful for use under the provisions of the Clean Air Act. Currently: This product is legal in California only for racing vehicles, which may never be used upon the highway.
Max HP Gain 14 hp @ 6000 rpm*
Max Torque Gain 16 ft-lbs @ 3400 rpm*
Included Notes Carbon fiber lid, Carbon Fiber air intake tube, rubber hose coupler, Panel air filter for the airbox, Conical air filter for the secondary intake, shielding for the conical filter, Mounting brackets & hardware, Auxiliary radiator deletion kit.

Write Your Own Review
You're reviewing:Dinan Carbon Fiber Cold Air Intake for BMW 335is E92 E93 2011-2013
Your Rating
Customer Questions
What is the impact of the intake system on the power-curve?
The increased airflow from our intake extends the power-curve into higher RPM’s for a noticeable change in performance.
What are the horsepower and torque gains with this intake system?
Horsepower is increased by +14 Hp @ 6000 rpm and Torque is increased by +16ft-lbs @ 3400 rpm with Dinan Stage 3 Software, DINAN Intercooler, and Free Flow Exhaust.
What models is this intake system compatible with?
This intake system is compatible with 2011 - 2013 BMW 335is Convertible and Coupe models.
What are the included components in the intake system?
The intake system includes a carbon fiber lid, carbon fiber air intake tube, rubber hose coupler, panel air filter for the airbox, conical air filter for the secondary intake, shielding for the conical filter, mounting brackets & hardware, and auxiliary radiator deletion kit.