Dinan Carbon Fiber Cold Air Intake for BMW 135i E82 E88 BMW 335i E92 E93

Share
Improve air-flow utilizing the stock ram-air
Out of stock
Barcode
813725022079
SKU
D760-0030
2,069.00€ 1,668.55€

As boost is increased through the use of performance software, the single factory intake becomes restrictive and the engine is lacking the air it needs to make maximum power. Our cold air intake force feeds the 3 liter turbocharged inline 6 with greater volumes of cool, oxygen rich air for substantial power gains by utilizing our secondary carbon fiber intake. The system is so effective that the carbon fiber inlet air temperature is a full 40 degrees Fahrenheit cooler than the incoming air from the stock inlet. Due to the increased airflow from our intake, the power-curve is extended into the higher RPM’s for a noticeable change.

The system is a direct replacement for the factory air box lid, employing a hand-crafted carbon fiber unit that also includes a secondary carbon fiber intake tube that captures cool air from the lower grill and includes the shielding for the conical filter to insulate it from power robbing engine compartment heat. Horsepower is increased by +14 Hp @ 6000 rpm and Torque is increased by +16ft-lbs @ 3400 rpm with Dinan Stage 3 Software, DINAN Intercooler and Free Flow Exhaust. Stage 2 software, Free Flow Exhaust produces 12 Hp and 13 ft-lb torque Stage 1 software, Free Flow Exhaust produces 9 Hp and 10 ft-lb torque Completely Stock car produces 5 Hp and 6 ft-lb torque Dinan Performance Software is highly recommended.

Models

  • 2008 - 2010 BMW 135i Convertible
  • 2008 - 2010 BMW 135i Coupe
  • 2007 - 2013 BMW 335i Convertible
  • 2007 - 2010 BMW 335i Coupe
  • 2007 - 2008 BMW 335i Sedan
  • 2007 - 2010 BMW 335xi Coupe
  • 2007 - 2008 BMW 335xi Sedan

Product Specifications

Emission Status This product is in compliance with U.S. EPA Memorandum 1A, or this product has not been found, nor is believed to be, unlawful for use under the provisions of the Clean Air Act. Currently: This product is legal in California only for racing vehicles, which may never be used upon the highway.
Max HP Gain 14 hp @ 6000 rpm*
Max Torque Gain 16 ft-lbs @ 3400 rpm*
Included Notes Carbon fiber lid, Carbon Fiber air intake tube, rubber hose coupler, K&N Panel air filter for the airbox, Dinan Conical air filter for the secondary intake, shielding for the conical filter, Mounting brackets & hardware.
Write Your Own Review
You're reviewing:Dinan Carbon Fiber Cold Air Intake for BMW 135i E82 E88 BMW 335i E92 E93
Your Rating
Customer Questions
What models is this product compatible with?
This product is compatible with the following BMW models: 2008 - 2010 BMW 135i Convertible, 2008 - 2010 BMW 135i Coupe, 2007 - 2013 BMW 335i Convertible, 2007 - 2010 BMW 335i Coupe, 2007 - 2008 BMW 335i Sedan, 2007 - 2010 BMW 335xi Coupe, 2007 - 2008 BMW 335xi Sedan.
What are the horsepower and torque gains with this product?
With Dinan Stage 3 Software, DINAN Intercooler, and Free Flow Exhaust, the horsepower is increased by +14 Hp @ 6000 rpm and torque by +16ft-lbs @ 3400 rpm. Stage 2 software and Free Flow Exhaust produce 12 Hp and 13 ft-lb torque. Stage 1 software and Free Flow Exhaust produce 9 Hp and 10 ft-lb torque. A completely stock car produces 5 Hp and 6 ft-lb torque. Dinan Performance Software is highly recommended.
What is included in the product specifications?
The product includes a carbon fiber lid, carbon fiber air intake tube, rubber hose coupler, K&N Panel air filter for the airbox, Dinan Conical air filter for the secondary intake, shielding for the conical filter, mounting brackets, and hardware.
Is this product compliant with emissions regulations?
This product is in compliance with U.S. EPA Memorandum 1A. It is legal in California only for racing vehicles and may never be used on the highway.