Defi DF Blue Racer N2 Boost Gauge Metric 52mm 3 Bar
Racedom is proud to supply the car enthusiast with a large selection of Defi Gauges Introducing the new Defi Racer N2 Gauges, these are a very quick responding and highly accurate analog gauges. Additionally, these gauges are standalone, and a control unit is not necessary.
Racer Gauges N2 are quick-responsive and high-accurate analog gauges. Gauges operate standalone and control unit is not necessary.
Include:
- Boost gauge
- 52mm in size
- Reads up to 3.0 BAR
- Blue face
- Includes all required wiring
- Includes gauge cup
- Includes hardware
Specifications
SI (Global) models (Illumination color is white.)
USDM models (Illumination color is Red.)
The dial is not visible until the ignition is turned on.
A new design of a combination of matte and glossy black surface finishing and metallic mirror printing provides a variety of appearances and textures in addition to high contrast visibility.
A switch and an indicator are included in the package of 80mm (3 1/8″) tachometer and peak and warning functions are available.
- *Racer Gauges N2 can not be linked to the Defi-Link System or ADVANCE System.
- *USDM models are sold only in the US.
- *SI models are sold globally except the US.
Main specification
- Size: 2 1/16″(52mm), 2 3/8″(60mm), and 3 1/8″(80mm)
- Standalone/control unit NOT necessary/non-link system
- Self-diagnosis function of disconnected/short-circuit
- Swtich and indicator is attached to 3 1/8″(80mm) tachometer
- Illumination color: global model -> white, USDM models -> red
- In-house production stepping motor provides smooth operation.
- Commercial attachment necessary
- Illumination ON/OFF: interlocked with vehicle illumination switch
- Opening/ending modes
- Mounting bracket attached
- Corresponding numbers of cylinders: 1, 2, 3, 4, 5, 6, and 8 (only for tachometer)
Lineup
SI models (Blue) | 52mm | 60mm | 80mm | Display range |
TURBO 2.0 | DF16001 | DF16601 | – | -100kPa to +200kPa |
TURBO 3.0 | DF16101 | DF16701 | – | -100kPa to +300kPa |
PRESS. | DF16201 | DF16801 | – | 0 to 1000kPa |
TEMP. | DF16301 | DF16901 | – | 30 to 150℃ |
E.G.T. | DF16401 | DF17001 | – | 200 to 1100℃ |
VOLT | DF16501 | DF17101 | – | 10 to 15V |
Tachometer 9000rpm | – | – | DF17201 | 0 to 9000rpm |
Tachometer 11000rpm | – | – | DF17301 | 0 to 11000rpm |
USDM models (Red) | 2 1/16″(52mm) | 2 3/8″(60mm) | 3 1/8″(80mm) | Display range |
BOOST 30PSI | DF16002 | – | – | -30inHg to +30PSI |
BOOST 45PSI | DF16102 | – | – | -30inHg to +45PSI |
PRESS. | DF16202 | – | – | 0 to 140PSI |
TEMP. | DF16302 | – | – | 100 to 300 F deg |
E.G.T. | DF16402 | – | – | 400 to 2000 F deg |
VOLT | DF16502 | – | – | 10 to 15V |
Tachometer 9000rpm | – | – | DF17202 | 0 to 9000rpm |
Tachometer 11000rpm | – | – | DF1732 | 0 to 11000rpm |
Specifications
Power supply voltage | DC10 to 15V (Exclusive for 12V vehicle) |
Current consumption |
2 1/16" (52mm) & 2 3/8" (60mm) series 3 1/8" (80mm) |
Dial color | Black (invisible until the ignition is turned on) |
Illumination color | SI models: white USDM models: red Pointer: White *The color cannot be switched. |
Size | Please refer to the manual. |
Applicable Number of Cylinders | 1, 2, 3, 4, 5, 6, 8 (only for tachometer) |
NOTE | *This product is for only on vehicles with a 12V electrical system. Never use this product on 24V vehicles. *Products can not be installed in altered vehicles. *Proper sensor attachments are necessary. |
Racer Gauge connection
Wiring diagram
- *Sensors, and sensor wires are common in those for ADVANCE System.
- *Control Unit is unnecessary to operate Racer Gauges. Racer Gauges cannot be linked to ADVANCE System or Defi-Link system.