Aeromotive Brushless In-Line 5.0 Spur Gear Pump with Variable Speed Controller

A high-performance variable-speed fuel pump with advanced features.

In stock

Barcode

684980010954

SKU

11196

2,370.00€ 1,911.29€

Aeromotive's True Variable Speed Controller offers the advantages of built-in pump speed control via a dedicated 0-5V analog DC input signal. The Controller capitalizes on our existing brushless technology by reducing fuel flow during low engine demand and decreasing an already low current draw, therefore minimizing both motor heat the introduction of environmental via reduced fuel recycling.

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Details

Aeromotive Brushless In-Line 5.0 Spur Gear Pump with Variable Speed Controller

Features

Supports
- Fuel injected engines:
  up to 3400 FWHP â naturally aspirated
  up to 2600 FWHP â forced air induction
- Carbureted engines:
  Up to 3600 FWHP â naturally aspirated
  Up to 2700 FWHP â forced air induction
E85 Compatible, reduce max FWHP by 30%
Lighter than the traditional external mount pumps.
Reduced current draw at higher, EFI pressures.
Extended service life in methanol and ethanol.
New integral spur-gear pumping mechanism.
90-PSI continuous operating pressure and up to 150-PSI peak pressure, base plus boost.
Integral, external brushless controller for clean installation, cooler fuel and enhanced reliability.
ORB-12 inlet and ORB-10 outlet ports.
Requires straight 12-VDC to 16-VDC power supply.
Not compatible with pulse modulated systems or fuel pump speed controllers.

EFI Rated flow of 1,700 lbs./hr. @ 40 psi, 13.5 volts
Carb Rated Flow of 1,850 lbs./hr. @ 9 psi, 13.5 volts

Manual

Reviews

Write Your Own Review

FAQ(6)

Customer Questions

What engines are supported by the Aeromotive Brushless In-Line 5.0 Spur Gear Pump?

The pump supports fuel injected engines up to 3400 FWHP naturally aspirated and up to 2600 FWHP forced air induction. For carbureted engines, it supports up to 3600 FWHP naturally aspirated and up to 2700 FWHP forced air induction.

Is the Aeromotive Brushless In-Line 5.0 Spur Gear Pump E85 compatible?

Yes, the pump is E85 compatible, but the maximum FWHP should be reduced by 30%.

What are some key features of the Aeromotive Brushless In-Line 5.0 Spur Gear Pump?

Some key features include being lighter than traditional external mount pumps, reduced current draw at higher EFI pressures, extended service life in methanol and ethanol, and an integral spur-gear pumping mechanism.

What is the operating pressure range of the Aeromotive Brushless In-Line 5.0 Spur Gear Pump?

The pump has a 90-PSI continuous operating pressure and can handle up to 150-PSI peak pressure (base plus boost).

What type of power supply is required for the Aeromotive Brushless In-Line 5.0 Spur Gear Pump?

The pump requires a straight 12-VDC to 16-VDC power supply.

Is the Aeromotive Brushless In-Line 5.0 Spur Gear Pump compatible with pulse modulated systems or fuel pump speed controllers?

No, the pump is not compatible with pulse modulated systems or fuel pump speed controllers.