Aeromotive In-Line Brushless Eliminator Pump with Variable Speed Controller

High-performance brushless fuel pump with speed controller

In stock

Barcode

684980010893

SKU

11190

1,570.99€ 1,266.93€

Aeromotive's True Variable Speed Controller offers the advantages of built-in pump speed control via a dedicated 0-5V analog DC input signal. The Controller capitalizes on our existing brushless technology by reducing fuel flow during low engine demand and decreasing an already low current draw, therefore minimizing both motor heat the introduction of environmental via reduced fuel recycling.

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Details

Aeromotive In-Line Brushless Eliminator Pump with Variable Speed Controller

Features

The Eliminator performance you expect and more:
- Fuel Injected Engines:
  up to 1900 FWHP â naturally aspirated
  up to 1400 FWHP â forced air induction
- Carbureted Engines:
  up to 2300 FWHP â naturally aspirated
  up to 1700 FWHP â forced air induction
E85 Compatible, reduce max FWHP by 30%
Lighter than the traditional Eliminator pump.
Reduced current draw at higher, EFI pressures.
Extended service life in methanol and ethanol.
Integral, external brushless controller for clean installation, cooler fuel and enhanced reliability.
Quieter than the traditional Eliminator pump.
ORB-12 inlet and ORB-10 outlet ports.
Requires straight 12-VDC to 16-VDC power supply.
Not compatible with pulse modulated systems or fuel pump speed controllers.

EFI Rated flow of 1,000 lbs./hr. @ 45 psi, 13.5 volts
Carb Rated Flow of 1,300 lbs./hr. @ 9 psi, 13.5 volts

Manual

Video

Reviews

Write Your Own Review

FAQ(5)

Customer Questions

What is the maximum horsepower supported by the Aeromotive In-Line Brushless Eliminator Pump?

For fuel-injected engines, it supports up to 1900 FWHP naturally aspirated and up to 1400 FWHP forced air induction. For carbureted engines, it supports up to 2300 FWHP naturally aspirated and up to 1700 FWHP forced air induction.

Is the Aeromotive In-Line Brushless Eliminator Pump E85 compatible?

Yes, it is E85 compatible, but the maximum FWHP is reduced by 30%.

What are some key features of the Aeromotive In-Line Brushless Eliminator Pump?

Some key features include being lighter than the traditional Eliminator pump, reduced current draw at higher EFI pressures, extended service life in methanol and ethanol, integral external brushless controller for clean installation, cooler fuel and enhanced reliability, quieter operation, and ORB-12 inlet and ORB-10 outlet ports.

What are the rated flow specifications for the Aeromotive In-Line Brushless Eliminator Pump?

The EFI rated flow is 1,000 lbs./hr. at 45 psi and 13.5 volts, while the carb rated flow is 1,300 lbs./hr. at 9 psi and 13.5 volts.

What power supply is required for the Aeromotive In-Line Brushless Eliminator Pump?

It requires a straight 12-VDC to 16-VDC power supply and is not compatible with pulse modulated systems or fuel pump speed controllers.