Aeromotive Brushless In-Line Eliminator Fuel Pump with Variable Speed Controller

Efficient Fuel Pump with Speed Control for Optimal Performance

In stock

Barcode

684980010930

SKU

11194

1,570.99€ 1,266.93€

Aeromotive's True Variable Speed Controller offers the advantages of built-in pump speed control via a dedicated 0-5V analog DC input signal. The Controller capitalizes on our existing brushless technology by reducing fuel flow during low engine demand and decreasing an already low current draw, therefore minimizing both motor heat the introduction of environmental via reduced fuel recycling.

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Details

Aeromotive Brushless In-Line Eliminator Fuel Pump with Variable Speed Controller

Features

The Eliminator performance you expect and more:
- Fuel Injected Engines:
  up to 1900 FWHP â naturally aspirated
  up to 1400 FWHP â forced air induction
- Carbureted Engines:
  up to 2300 FWHP â naturally aspirated
  up to 1700 FWHP â forced air induction
E85 Compatible, reduce max FWHP by 30%
Lighter than the traditional Eliminator pump.
Reduced current draw at higher, EFI pressures.
Extended service life in methanol and ethanol.
Integral, external brushless controller for clean installation, cooler fuel and enhanced reliability.
Quieter than the traditional Eliminator pump.
ORB-12 inlet and ORB-10 outlet ports.
Requires straight 12-VDC to 16-VDC power supply.
Not compatible with pulse modulated systems or fuel pump speed controllers.

EFI Rated flow of 1,000 lbs./hr. @ 45 psi, 13.5 volts
Carb Rated Flow of 1,300 lbs./hr. @ 9 psi, 13.5 volts

Manual

Video

Reviews

Write Your Own Review

FAQ(5)

Customer Questions

What are the performance capabilities of the Aeromotive Brushless In-Line Eliminator Fuel Pump?

The Aeromotive Brushless In-Line Eliminator Fuel Pump is capable of supporting up to 1900 FWHP for fuel-injected engines and up to 2300 FWHP for carbureted engines.

Is the Aeromotive Brushless In-Line Eliminator Fuel Pump E85 compatible?

Yes, the Aeromotive Brushless In-Line Eliminator Fuel Pump is E85 compatible, with a reduction in maximum FWHP by 30%.

What are some key features of the Aeromotive Brushless In-Line Eliminator Fuel Pump?

Some key features of the Aeromotive Brushless In-Line Eliminator Fuel Pump include its lighter weight compared to traditional pumps, reduced current draw at higher EFI pressures, extended service life in methanol and ethanol, and an integral external brushless controller for clean installation and enhanced reliability.

What are the inlet and outlet ports of the Aeromotive Brushless In-Line Eliminator Fuel Pump?

The Aeromotive Brushless In-Line Eliminator Fuel Pump features ORB-12 inlet and ORB-10 outlet ports.

What power supply is required for the Aeromotive Brushless In-Line Eliminator Fuel Pump?

The Aeromotive Brushless In-Line Eliminator Fuel Pump requires a straight 12-VDC to 16-VDC power supply and is not compatible with pulse modulated systems or fuel pump speed controllers.