Aeromotive Brushless In-Line A1000 Fuel Pump with Variable Speed Controller

High-Performance Brushless Fuel Pump with Speed Control

In stock

Barcode

684980010923

SKU

11193

1,206.00€ 972.58€

Aeromotive's True Variable Speed Controller offers the advantages of built-in pump speed control via a dedicated 0-5V analog DC input signal. The Controller capitalizes on our existing brushless technology by reducing fuel flow during low engine demand and decreasing an already low current draw, therefore minimizing both motor heat the introduction of environmental via reduced fuel recycling.

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Details

Aeromotive Brushless In-Line A1000 Fuel Pump with Variable Speed Controller

Features

The A1000 performance you expect and more:
- Fuel Injected Engines:
  up to 1300 FWHP â naturally aspirated
  up to 1000 FWHP â forced air induction
- Carbureted Engines:
  up to 1500 FWHP â naturally aspirated
  up to 1200 FWHP â forced air induction
E85 Compatible, reduce max FWHP by 30%
Lighter than the traditional A1000 pump.
Reduced current draw at higher, EFI pressures.
Extended service life in methanol and ethanol.
Integral, external brushless controller for clean installation, cooler fuel and enhanced reliability.
Quieter than the traditional A1000 pump.
ORB-10 inlet and outlet ports.
Requires straight 12-VDC to 16-VDC power supply.
Not compatible with pulse modulated systems or fuel pump speed controllers.

EFI rated flow of 700 lbs./hr. @ 45 psi, 13.5 volts
Carb rated flow of 900 lbs./hr. @ 9 psi, 13.5 volts

Manual

Video

Reviews

Write Your Own Review

FAQ(3)

Customer Questions

What are the power specifications of the Aeromotive Brushless In-Line A1000 Fuel Pump with Variable Speed Controller?

The fuel pump is suitable for fuel-injected engines with up to 1300 FWHP naturally aspirated or up to 1000 FWHP forced air induction. For carbureted engines, it supports up to 1500 FWHP naturally aspirated or up to 1200 FWHP forced air induction. It is E85 compatible, but the maximum FWHP is reduced by 30%.

What are the key features of the Aeromotive Brushless In-Line A1000 Fuel Pump?

The key features include being lighter than the traditional A1000 pump, reduced current draw at higher EFI pressures, extended service life in methanol and ethanol, integral external brushless controller for clean installation, cooler fuel and enhanced reliability, quieter operation, ORB-10 inlet and outlet ports, and requiring a straight 12-VDC to 16-VDC power supply. It is not compatible with pulse modulated systems or fuel pump speed controllers.

What are the flow ratings of the Aeromotive Brushless In-Line A1000 Fuel Pump?

The EFI rated flow is 700 lbs./hr. at 45 psi and 13.5 volts, while the carb rated flow is 900 lbs./hr. at 9 psi and 13.5 volts.