AEM Universal Infinity Starter kit
- 05 Hrs
- 23 Min
Infinity-506 & Infinity-508 Stand-Alone Programmable Engine Management System
The Infinity-506 and Infinity-508 ECU, an affordable state-of-the-art engine control unit designed for four- and six-cylinder racing engines and V8 racing engines using high-impedance injectors. Extensive research and development was put into designing the Infinity-506/508 to ensure that it delivers an unmatched price point for this level of engine control.
The Infinity-506 is designed for racing engines with up to 6 cylinders. It features a smaller footprint than the Infinity-7088/710 (5.855” x 5.55” x 1.8”) and a single, weatherproof 80-pin connector.
The Infinity-508 is designed for high performance V8 crate engines and smaller race engines using high impedance injectors. It also features the same small footprint and single, weatherproof 80-pin connector as the Infinity-506.
The Infinity-506/508 include all of the advanced features found in its larger iteration including the latest generation 200 MHz automotive processor that can process 400 MIPS. Airflow model based (VE) tuning eliminates lookup of many correction tables needed in previous generation ECUs. Flex fuel and multi-fuel capability, on-board wideband air/fuel control, map switching and knock control are included. Engine protection strategies include coolant temp, oil temp, AFR vs. MAP, intake air temp, knock or fuel pressure. Programmable drive-by-wire, variable cam timing, boost control, nitrous control and traction control are included. Data logging up to 64GB via a removable USB is standard with logging rates up to 1KHZ per channel. The Infinity-506/508 is able to communicate with 3rd party dashes and loggers and is AEMnet enabled. All maps can be password protected. Its sealed enclosure and IP67 rated communications ports are suitable for engine bay mounting.
AEM offers a flying lead wiring harness for the Infinity-506/508 that is 96” in length and pre wired with power, grounds, a power relay, fuse block, wideband and AEMnet. A Plug & Pin kit is also available for the Infinity-506/508 that includes an 80-pin connector with cover, 80 small pins, 1 micro relay with pins and 30 sealing plugs. Many Plug & Play adapter harnesses for popular race vehicles are currently in development and will be available in the near future.
When you combine the Infinity-506/508’s capabilities and price point with AEM’s industry leading after-purchase support system that includes free technical support, there is no question that it is the ultimate engine control solution for race teams and weekend track cars with 4-6 cylinders or crate V8s/engines up to 8 cylinder using high impedance injectors.
INFINITY EMS FEATURES:
- Airflow model based (VE) tuning
- ECU Set Up Wizard simplifies start up
- Flex fuel compatible
- Multi fuel capable
- Drive by wire
- Variable valve control
- Multiple boost control strategies
- Nitrous control
- Map switching
- Internal Wideband UEGO air/fuel controller
- Dual knock sensing circuits
- Data logging up to 64GB
- Outputs to 3rd party dashes and data loggers
- Industry leading data transfer speed (up to 480Mb/sec)
- Integrated engine protection strategies
- Sealed enclosure and IP67 rated comms ports
|Cylinders||Up to 12||Up to 10||Up to 8||Up to 8||Up to 6|
|Low Impedance Injectors (Sequential)||12||10||8||n/a||6|
|High Impedance Injectors (Sequential)||12||10||8||Up to 8||Up to 6|
|Coils (0-5v Falling Edge)||12||10||8||8||6|
|Analog Voltage Inputs||Up to 17||Up to 17||Up to 17||Up to 9||Up to 9|
|Analog Temp Inputs||Up to 6||Up to 6||Up to 6||Up to 3||Up to 3|
|Digital Inputs||Up to 8||Up to 8||Up to 8||Up to 6||Up to 8|
|VR/Mag Inputs||Up to 6||Up to 6||Up to 6||Up to 4||Up to 4|
|On Board Wideband Air/Fuel Controllers||2||2||2||1||1|
|High Side Outputs||Up to 2||Up to 2||Up to 2||1||1|
|Low Side Outputs||10||10||10||6||8|
|4-Wire Stepper Motor Control||Yes||Yes||Yes||Yes||Yes|
|Boost Control (RPM,Time,Gear,VSS,Switch Input,Flex Fuel Content)||Yes||Yes||Yes||Yes||Yes|
|Variable Cam Control||Up to 4||Up to 4||Up to 4||Up to 2||Up to 2|
|Nitrous Control||Up to 4-Stage||Up to 4-Stage||Up to 4-Stage||Single Stage||Single Stage|
|Traction Control||Up to 4-Wheel Speed||Up to 4-Wheel Speed||Up to 4-Wheel Speed||Up to 2-Wheel Speed||Up to 2-Wheel Speed|
|Weather Resistant Sealed Electronics||Yes||Yes||Yes||Yes||Yes|
This installation is not for the tuning novice! Use this system with EXTREME caution! The AEM Infinity Programmable EMS allows for total flexibility in engine tuning. Misuse or improper tuning of this product can destroy your engine! If you are not well versed in engine dynamics and the tuning of engine management systems DO NOT attempt the installation.
All supplied AEM calibrations, Wizards and other tuning information are offered as potential starting points only. IT IS THE RESPONSIBILITY OF THE ENGINE TUNER TO ULTIMATELY CONFIRM IF THE CALIBRATION IS SAFE FOR ITS INTENDED USE. AEM holds no responsibility for any engine damage that results from the misuse or mistuning of this product!
50 PSIa MAP Stainless Steel Sensor Kit. Stainless Steel Sensor Body. 1/8" NPT Male Thread. Includes: 50 PSIa Stainless Steel Sensor and connector and pins
Sensor Performance Specifications:
- Accuracy: +/- 1% Full Scale over -40C to 105C includes Repeatability, Hysteresis and Linearity
- Operating Temp: -40C to 105C / -40F to 221F
- Burst Pressure: 500PSI
- Response Time: < 1mS
- Wetted Materials: 304L & 316L Stainless Steel
- Vibration: 100 to 2000Hz, 20g Sinusoidal, 3 Axes
- Weight: <85g
- Supply Current: <6mA at 5 Vdc
- Output: .5 to 4.5Vdc Linear
- Transfer Function: PSI = (12.5*(Voltage))-20.95
- Elec. Termination: Integral weatherproof connector, includes mating connector with 12" leads, 1 Red (Supply Voltage 5Vdc +/- .5), 1 Black (Ground), 1 Green (Output)
The Plug & Pin kit for the Infinity-506/508 includes an 80-pin connector with cover, 80 small pins, 1 micro relay with pins and 30 sealing plugs.
THIS PRODUCT MAY BE USED SOLELY ON VEHICLES USED IN SANCTIONED COMPETITION WHICH MAY NEVER BE USED UPON A PUBLIC ROAD OR HIGHWAY, UNLESS PERMITTED BY SPECIFIC REGULATORY EXEMPTION. INSTALLERS/USERS LOCATED OUTSIDE THE UNITED STATES SHOULD ACT IN ACCORDANCE WITH THEIR LOCAL LAWS AND REGULATIONS.
IT IS THE RESPONSIBILITY OF THE INSTALLER AND/OR USER OF THIS PRODUCT TO ENSURE THAT IT IS USED IN COMPLIANCE WITH ALL APPLICABLE LAWS AND REGULATIONS, AND THIS PRODUCT MUST NOT BE PURCHASED IF THE INTENT IS TO USE IT IN AN UNLAWFUL MANNER.