APR Intercooler System for Audi Q5 1.8T/2.0T
El sistema intercooler APR es una actualización masiva montada en el frente que reduce drásticamente la temperatura del aire de admisión (IAT), minimiza el remojo de calor y proporciona un mayor rendimiento. El sistema es fácil de instalar, un diseño de atornillado directo, que se recomienda en cada etapa de rendimiento.
Características:
- Dramáticamente reduce la temperatura del aire de admisión (IAT)
Aumenta la potencia mientras minimiza la pérdida de potencia por calor absorbido.
17 ganancia de caballos de fuerza sobre el sistema de fábrica! - Área frontal masiva y volumen del núcleo.
2.50" x 5.50" x 26.00" - 143.00 in² frnt. & 357.5 in³ volume - OEM
2.25" x 16.2" x 22.00" - 356.4 in² frnt. & 801.9 in³ volume - APR - Diseño de núcleo altamente efectivo
Núcleo de barra y placa con aletas escalonadas y con lamas.
Pruebas rigurosas determinaron estilo central, densidad de aletas y tamaño.
Baja caída de presión + enfriamiento altamente efectivo = ¡alto rendimiento! - Tapas de extremo fundidas suaves
Diseñado para baja turbulencia/restricción y flujo máximo.
Forma orgánica para promover el flujo de aire en todo el núcleo.
Probado a presión para prevenir fugas de impulso que roban potencia. - Fácil de instalar
¡Con el parachoques quitado, la instalación toma minutos!
¡No es necesario recortar ni perforar!
Instrucciones completas y soporte al cliente de renombre mundial APR incluido. - Diseñado por ingenieros con láseres
¡Con el mejor equipo y los ingenieros más inteligentes, simplemente funciona!
Diseño
Desafortunadamente, a simple vista, muchos diseños de intercooler parecen iguales para el ojo inexperto. Sin embargo, la efectividad del sistema y el rendimiento general están determinados en gran medida por varios indicadores clave. La selección de aleaciones, el diseño del tanque final, el tipo de construcción, el estilo de las aletas, la densidad de las aletas y las dimensiones generales del núcleo deben ser analizados y equilibrados adecuadamente para ofrecer un rendimiento líder en su clase. Si bien el objetivo del fabricante original es crear un diseño ligero, fácil de fabricar y económico de producir, capaz de soportar los niveles de potencia de fábrica,El intercooler de APR debe ser capaz de soportar más del doble de la potencia de fábrica.Lograr este objetivo requirió un enfoque de múltiples pasos centrado en la selección del núcleo del intercooler, el diseño del tanque final y la ubicación de la instalación.
Intercooler Core Design
The APR Intercooler core is a large bar-and-plate design featuring densely packed staggered and louvered fins. This design offers exceptional cooling while balancing pressure loss across the core, and maintaining critical airflow to the components behind the intercooler system. The core size was appropriately matched to the platform, minimizing pressure drop while leaving adequate space for appropriately designed end tanks. To APR’s mechanical engineering experts, the design represented the ultimate in performance, far exceeding the capabilities of the factory intercooler. To the driver, the result is simple: Repeatable performance, even in the most demanding of situations!
Core Style / Internal Fin Structure:
APR’s Engineers paid close attention to the balance between core effectiveness and pressure drop through the core, core style and fin density. With fin density too low, pressure drop decreases dramatically, but typically results in a core incapable of effectively cooling. Likewise, with fin density too great, pressure drop increases dramatically, resulting in the turbocharger working harder, and hotter, to produce the same level of airflow. By fine tuning this often unseen balancing act, as illustrated below, APR’s Engineers were able to maximize performance.
Internal Fin Structure
| Number | Type | Fin Type | Fin Density |
Pressure Drop |
Cooling Effectiveness |
Manufacturing Cost |
Comments | Recommended |
|---|---|---|---|---|---|---|---|---|
| 1 | Tube and Fin | Straight Channel | Low | Low | Low | $ | Poor Cooling | Not Recommended |
| 2 | Bar-and-Plate | Straight Channel | Low | Low | Low | $$ | Poor Cooling | Not Recommended |
| 3 | Quality Bar-and-Plate | Staggered/Offset | High | Low | High | $$$ | Excellent Cooling | Recommended! |
| 4 | Overly Dense Bar-and-Plate | Staggered/Offset | High | High | High | $$$ | High pressure drop | Not Recommended |
Core Size:
APR’s Engineers also paid close attention to the balancing act between core effectiveness, pressure drop and space for end tanks through core sizing. With the core too small, pressure drop decreases dramatically, but typically results in a core incapable of effectively cooling. Likewise, with core size too great, pressure drop can increase, resulting in the turbocharger working harder. However, more importantly, with no space for appropriate end tanks, utilization of the core and overall effectiveness of the system diminishes rapidly, negating the benefit of the larger core. APR’s engineers were able to balance each of these characteristics to deliver maximum performance.
| System | Core Type | Thickness | Width | Height | Volume | Frontal Area |
|---|---|---|---|---|---|---|
| OEM | Tube and Fin | 2.5" | 26" | 5.5" | 357.5 in³ | 143.0 in² |
| APR | Bar and Plate | 2.25" | 22" | 16.2" | 801.9 in³ | 356.45 in² |
The APR system increases frontal surface area by 140.26% and has a 124.31% larger core!
Intercooler End Tank Design
To fully utilize the massive core, APR’s mechanical engineers designed cast aluminum end tanks organically shaped for proper airflow distribution across the entire core. By correctly sizing the intercooler core, end tank design was not sacrificed. The one-piece end tanks are CNC machined to provide a slip resistant mounting surface for hoses, precise integrated mounting surfaces, and perfectly flat connecting surfaces used for TIG welding the tanks to the core. Through proper alignment in welding jigs, each unit is assembled to tight tolerances for a precise and accurate fit.
Intercooler Bracket Design
APR’s mechanical engineers designed CNC-bent and TIG-welded mounting brackets to securely hold the intercooler in place. The brackets make the install extremely easy. With the bumper and factory intercooler unit removed, the APR intercooler installs in minutes without any cutting, drilling or trimming. For the DIY customer, this makes a home install simple, and for everyone else it eliminates hidden costs that often come with a more labor intensive install.
