AEM Kit de capteur de température de liquide de refroidissement

Water / Coolant Temp Sensor Kit. 3/8"-18 NPT. Includes: Water / Coolant Temp Sensor, 3/8"NPT Aluminum Bung & Flying Lead Connector.

All AEM Sensors include a flying lead with a weather-tight seal and 12 inch insulated wires This is important since the correct connector will give you the most accurate voltage possible.

Sensor Performance Specifications:

• Accuracy: < 2°C / 3.6°F
• Operating Temp: -40C to 135C / -40F to 275F
• Dissipation Constant: 24 mW/°C. The ratio, at a specified ambient temperature, of the change in the power dissipation of the sensor to the resultant temperature change of the thermistor. Test medium: silicone oil.
• Thermal Time Constant: 20-30 sec. The time required for the sensor to achieve 63.2% of its steady state value when subjected to a step change in ambient temperature [Tc=(Tf-Ti)*63.2%+Ti]. Test medium: silicone oil.
• Sensor Body Material: Brass
• Thread: 3/8"-18 NPT
• Hex Size: 3/4"
• Installation Torque: 20Nm / 15 ft-lbs
• Weight: 39.5g
• Supply Current: 5Vdc
• Elec. Termination: Weatherproof connector. Includes mating Connector with Flying Leads