LinkECU CANKEYPAD15 101-0330 15 key (3x5) plus 2 Rotary Encoders fitting 15mm inserts (sold separately) CAN Keypads

Product Overview

The Link ECU 15-Button CAN Keypad with 2 Rotary Encoders (PN: 101-0330) offers an advanced and customizable interface for controlling various functions within your vehicle's electronic systems. Designed for seamless integration with Link's G4X ECUs, this keypad enhances driver interaction through programmable buttons, rotary encoders, and LED indicators.

Key Features:

• Seamless G4X Integration: Fully compatible with Link's G4X ECUs, allowing for straightforward configuration via PC Link software.
• Customizable Button Inserts: Interchangeable 15mm button inserts enable personalized labeling for each function (sold separately).
• Programmable RGB Indicators: Each button features an RGB LED ring, configurable to indicate different statuses or modes.
• Dual Rotary Encoders: Two rotary encoders with 16 blue indicator LEDs each, providing precise control and feedback.
• Additional Analog Inputs: Four extra analog inputs allow for direct connection of additional sensors or switches to the CAN Bus network.
• Rugged Construction: IP67/IP69K rated for water and dust resistance, with an operating temperature range of -40°C to +70°C, ensuring reliability in harsh environments.
• High Durability: Rated for up to 3 million operations, providing long-term performance.

Technical Specifications:

• Connector: DTM4 (Black = Ground, Red = Power, White = CAN High, Blue = CAN Low)
• CAN Protocol: CANopen
• Node ID: 0x15 (21)
• Default Baud Rate: 1000 kbit/s
• Ingress Protection: IP67/IP69K
• Chemical Resistance: Resistant to DEET, engine cleaner, isopropyl alcohol, suntan lotion, multi-purpose cleaner, orange citrus cleaner, and muriatic acid
• UV Protection: UVB 400 hours
• Salt Spray Resistance: ASTM B117 compliant
• Dimensions: 181.5mm (W) x 70mm (H)
• Mounting Specs: Stud gap center-to-center: 136.14mm; Nuts thread: #10-32; Maximum torque: 0.8Nm

Box Contents:

• 1 x 15-Button CAN Keypad with 2 Rotary Encoders
• 1 x DTM4 Mating Connector Kit
• 1 x Molex Mating Connector Kit
• 1 x Link Sticker
• 1 x Keypad Button Insert – Link Logo

Note: The keypad ships with empty button inserts. Additional inserts must be selected and purchased individually.