APR Catch Can - 1.8T / 2.0T EA888 Gen 3 MQB
The APR Oil Catch Can System traps excessive crankcase oil vapors and gunk from entering the engine. The system reduces carbon buildup on intake valves, and octane lowering oil vapors and oil pooling within the intake tract. It’s a simple modification to install, drains in seconds with the flick of a knob, and is recommended at all stages of performance.
Caractéristiques
- Augmente les performances
Augmente les performances en éliminant une fuite de suralimentation courante, et en réduisant les vapeurs d'huile qui abaissent l'indice d'octane et l'accumulation de carbone qui restreint le flux d'air. - Attrape l'huile et les saletés
L'huile et les dépôts se rassemblent dans la boîte, pas dans les tuyaux de l'intercooler.
Facile à vider
Un simple bouton permet au système de se vider en quelques secondes sans aucun outil. - Facile à installer
S'installe en quelques minutes. Les tuyaux s'emboîtent facilement sans outils grâce aux raccords OEM Norma. - Facile à entretenir
L'entretien annuel est un jeu d'enfant grâce à la conception en deux pièces en billette. - Tuyaux de haute qualité
Résister à la dégradation de l'huile, aux plis, à l'abrasion et au blocage dû au gel, avec un aspect OEM. - Canette, plaque et support de haute qualité
Des pièces en aluminium et en acier inoxydable solides, propres et attrayantes ont fière allure dans le compartiment moteur.
The Problems
An engine produces extreme pressures within its cylinders during operation and some ultimately slips by the piston rings and pressurizes the engine’s crankcase. This is exacerbated when increasing horsepower and driving harder. To relieve the pressure, the engine uses a PCV system that dumps the pressure, along with oil vapors, back into the intake tract to be consumed by the engine. Unfortunately, this results in the following performance robbing scenarios:
- Oil vapors mix with the air/fuel mixture, which reduces octane and hurts performance.
- Carbon builds up on the back of intake valves, which reduces airflow and hurts performance.
- Messy oil pools in the intake tract and coats the intercooler, leading to hose degradation, and reduced IC effectiveness.
The Solution
The APR Oil Catch Can System traps excessive crankcase oil vapors and gunk from entering the engine while the engine is under load. The system routes crankcase gasses through the APR catch can, which filters oil vapors through a track-proven four-staged baffling system. The vapors pool in the bottom of the can, while the rest of the pressure is diverted back to the intake tract where it’s burned off by the engine.
The result is simple:
- A cleaner engine
- Better performance
- Elimination of a possible failure point
System Overview
More Photos
Requirements: The APR Oil Catch Can system requires an APR Carbon Fiber Intake System for install.