Aeromotive 3.5 Brushless Gear Pump-External
The market leader in fuel delivery systems and components, Aeromotive introduces its first brushless fuel pump series. The 3.5 Brushless Gear pump provides the Pro-Series Fuel Pump performance the world has come to trust and depend on, now available with the latest Spur-Gear pumping mechanism and brushless-motor technology. Built for up to 90 psi of sustained pressure, this new pump supports Pro-Series flow at higher pressures with minimal drop in flow. This new brushless spur-gear pump is able to move more fuel and sustain higher pressures without failure.
Aeromotive 3.5 Brushless Gear Pump-External
Brushless motors employ sensors to monitor rotor angle to provide faster and more reliable phase shifting, producing more torque capacity and motor efficiency. Instead of the armature rotating, in a brushless motor the magnets rotate around the armature and the motor controller manages the phase shift to keep the motor rotating under load (load is related to pressure in a fuel pump). With more torque per watt and a higher torque to weight ratio, brushless motors produce lower noise and deliver higher reliability.
With a higher level of efficiency, down to fractions of a second in design speed control, the new Aeromotive brushless fuel pumps provide precise control of fuel pump RPM as pressure rises, better maintaining pump RPM and flow, producing a flatter flow curve. Tight tolerances result in less current draw, less heat and extended life. Now there is the ability to upgrade to a premium brushless pump for faster, more reliable and uninterrupted fuel delivery with less power consumption and potential for wear or failure.
Features
- The Pro-Series performance you expect and more:
- Fuel injected engines:
up to 2400 FWHP â naturally aspirated
up to 1800 FWHP â forced air induction - Carbureted engines:
Up to 2600 FWHP â naturally aspirated
Up to 2000 FWHP â forced air induction
- Fuel injected engines:
- E85 Compatible, reduce max FWHP by 30%
- Lighter than the traditional Pro-Series pump.
- Reduced current draw at higher, EFI pressures.
- Extended service life in methanol and ethanol.
- New integral spur-gear pumping mechanism.
- 90-PSI continuous operating pressure and up to 150-PSI peak pressure, base plus boost.
- Integral, external brushless controller for clean installation, cooler fuel and enhanced reliability.
- ORB-12 inlet and ORB-10 outlet ports.
- Requires straight 12-VDC to 16-VDC power supply.
- Not compatible with pulse modulated systems or fuel pump speed controllers.
EFI Rated flow of 1,250 lbs./hr. @ 40 psi, 13.5 volts
Carb Rated Flow of 1,350 lbs./hr. @ 9 psi, 13.5 volts
Pump Details
Mounting Configuration: External
| CARB or EFI | Power Adder | FUEL | Horsepower |
|---|---|---|---|
| EFI | Naturally Aspirated | Gas | 2400 |
| EFI | Naturally Aspirated | E85 | 1680 |
| CARB | Naturally Aspirated | Gas | 2600 |
| CARB | Naturally Aspirated | E85 | 1820 |
| EFI | Forced Induction | Gas | 1800 |
| EFI | Forced Induction | E85 | 1260 |
| CARB | Forced Induction | Gas | 2000 |
| CARB | Forced Induction | E85 | 1400 |
