La pagina per gli amanti della velocità.
They will flow race gas, pump gas, or ethanol so that you can reach your target goal in both horsepower, and speed. Injector Dynamics design, develop and test their products in-house and with their partnership with BOSCH, can provide high-quality injectors through state of the art testing equipment. A results-driven company, Injector Dynamics values important metrics such as idle quality, tunability, consistency and accurate data. They are one of the best manufacturers of fuel injectors that you are going to find.
Flow Restriction vs Contaminant Load
The ID F750 is designed to hold a high level of contaminant while maintaining low restriction to flow. This is accomplished with a highly efficient filter element, designed with low pressure drop in mind. At a flow rate of 750 liters per hour, the ID F750 will hold five grams of contaminant, the equivalent of approximately one teaspoon before requiring replacement. Higher flow rates are possible, but will require more frequent filter changes, depending on the cleanliness of your fuel system.
Features
- Corrosion resistant internals make it compatible with all known fuels, capable of extended service life with corrosive fuels.
- Compact body allows fitment in 200+ applications, including current and future engines utilizing short body injectors.
- Improved internal flow path increases output by 5% without sacrificing low flow performance.
- Stronger magnetic circuit offers stable operation up to 10 bar.
- Replaceable inlet filter extends service life.
Basic Specifications
Nominal Flow Rate – 1065cc/min @ 3.0 Bar (43.5 psi) Using Gasoline at 52 Degrees C (125 Degrees F)
Maximum Differential Fuel Pressure – 10.0 Bar (145.0 psi)
Fuel Compatibility – Compatible With All Known Fuels
Electrical Connector – USCAR
Dimensional Drawing
Slope & Offset vs Pressure
ID1050x Dynamic Flow Data | ||||||
Fuel Pressure | Offset | Slope | ||||
(psid) | (µsec) | (cc/min) | ||||
8 Volts | 10 Volts | 12 Volts | 14 Volts | 16 Volts | ||
40.0 | 1920 | 1410 | 1115 | 920 | 790 | 1020 |
43.5 | 1955 | 1425 | 1125 | 925 | 795 | 1065 |
45.0 | 1970 | 1435 | 1130 | 930 | 800 | 1085 |
50.0 | 2025 | 1475 | 1160 | 955 | 825 | 1145 |
55.0 | 2080 | 1515 | 1190 | 980 | 845 | 1205 |
60.0 | 2140 | 1540 | 1215 | 1000 | 860 | 1260 |
65.0 | 2195 | 1560 | 1225 | 1010 | 855 | 1305 |
70.0 | 2255 | 1575 | 1235 | 1015 | 850 | 1350 |
75.0 | 2340 | 1610 | 1250 | 1020 | 850 | 1390 |
80.0 | 2440 | 1655 | 1265 | 1020 | 850 | 1420 |
85.0 | 2555 | 1705 | 1280 | 1030 | 855 | 1455 |
90.0 | 2680 | 1765 | 1315 | 1045 | 865 | 1490 |
95.0 | 2815 | 1825 | 1355 | 1075 | 880 | 1530 |
100.0 | 2960 | 1890 | 1405 | 1110 | 900 | 1565 |
Dimensional Drawing
ID725 | ID850 | ID1000 | ID1050x | ID1300x2 | ID1700-XDS | ID2000 | ID2600-XDS | ||||||||
(psid) | (cc/min) | (psid) | (cc/min) | (psid) | (cc/min) | (psid) | (cc/min) | (psid) | (cc/min) | (psid) | (cc/min) | (psid) | (cc/min) | (psid) | (cc/min) |
40 | 690 | 40 | 845 | 40 | 980 | 40 | 1020 | 40 | 1275 | 43.5 | 1725 | 43.5 | 2225 | 43.5 | 2600 |
43.5 | 715 | 43.5 | 885 | 43.5 | 1015 | 43.5 | 1065 | 43.5 | 1335 | 45 | 1760 | 45 | 2255 | 45 | 2640 |
45 | 730 | 45 | 905 | 45 | 1035 | 45 | 1085 | 45 | 1360 | 50 | 1855 | 50 | 2365 | 50 | 2769 |
50 | 770 | 50 | 955 | 50 | 1085 | 50 | 1145 | 50 | 1440 | 55 | 1950 | 55 | 2470 | 55 | 2898 |
55 | 810 | 55 | 1005 | 55 | 1135 | 55 | 1205 | 55 | 1520 | 60 | 2040 | 60 | 2575 | 60 | 3022 |
60 | 850 | 60 | 1050 | 60 | 1180 | 60 | 1260 | 60 | 1590 | 65 | 2125 | 65 | 2680 | 65 | 3138 |
65 | 890 | 65 | 1090 | 65 | 1225 | 65 | 1305 | 65 | 1655 | 70 | 2205 | 70 | 2780 | 70 | 3255 |
70 | 925 | 70 | 1130 | 70 | 1265 | 70 | 1350 | 70 | 1715 | 75 | 2285 | 75 | 2875 | 75 | 3368 |
75 | 960 | 75 | 1170 | 75 | 1305 | 75 | 1390 | 75 | 1770 | 80 | 2360 | 80 | 2970 | 80 | 3478 |
80 | 990 | 80 | 1205 | 80 | 1345 | 80 | 1420 | 80 | 1820 | 85 | 2435 | 85 | 3055 | 85 | 3587 |
85 | 1020 | 85 | 1240 | 85 | 1390 | 85 | 1455 | 85 | 1860 | 90 | 2505 | 90 | 3140 | 90 | 3671 |
90 | 1050 | 90 | 1275 | 90 | 1435 | 90 | 1490 | 90 | 1895 | 95 | 2575 | 95 | 3225 | 95 | 3737 |
95 | 1080 | 95 | 1310 | 95 | 1485 | 95 | 1530 | 95 | 1925 | 100 | 2640 | 100 | 3300 | 100 | 3803 |
100 | 1110 | 100 | 1350 | 100 | 1530 | 100 | 1565 | 100 | 1950 | 105 | 3375 | 105 | 3905 | ||
105 | 1140 | 110 | 3445 | 110 | 3974 | ||||||||||
110 | 1170 | 115 | 3515 | 115 | 4037 | ||||||||||
115 | 1200 | 120 | 3580 | 120 | 4095 | ||||||||||
120 | 1235 | 125 | 3645 | 125 | 4146 | ||||||||||
130 | 3710 | 130 | 4192 |
Total System Pressure (base + boost, unless returnless) | |||||||||
All flow in CC/min) | |||||||||
Data Source | Pumps | Voltage | 45 psi | 60 psi | 75 psi | 90 psi | 105 psi | 120 psi | # of Pumps |
Real Street | AEM 50-1000 | 13.20 | 5,083 | 4,433 | 3,983 | 3,433 | 2,883 | N/A | 1 |
Real Street | AEM 50-1200 | 13.20 | 5,466 | 4,833 | 4,183 | 3,533 | 2,950 | N/A | 1 |
Real Street | AEM 50-1005 | 13.20 | 5,583 | 5,316 | 5,066 | 4,816 | 4,516 | N/A | 1 |
Real Street | Aeromotive 11165 | 13.20 | 5,183 | 4,633 | 4,200 | 3,733 | 3,300 | N/A | 1 |
Real Street | Aeromotive 11150 | 13.20 | 5,166 | 4,566 | 3,883 | 3,133 | 2,433 | N/A | 1 |
Real Street | Walbro F90000267 | 13.20 | 6,666 | 5,933 | 5,266 | 4,500 | 3,033 | N/A | 1 |
Real Street | Walbro F90000274 | 13.20 | 6,666 | 5,933 | 5,266 | 4,500 | 3,933 | N/A | 1 |
Real Street | Walbro F90000285 | 13.20 | 7,533 | 6,983 | 6,316 | 5,766 | 5,150 | N/A | 1 |
Radium | Walbro F90000295 * | 13.54 | 8,083 | 7,500 | 6,750 | 5,916 | 5,333 | N/A | 1 |
Radium | TI BKS1000 * | 13.54 | 9,616 | 9,133 | 8,666 | 7,950 | 7,466 | N/A | 1 |
Radium | Bosch BR540 * | 13.20 | 6,733 | 6,283 | 5,833 | 5,383 | 4,916 | N/A | 1 |
Real Street | Bosch 044 | 13.20 | 4,883 | 4,666 | 4,466 | 4,216 | 3,866 | N/A | 1 |
Weldon | Weldon 2015 | 14.00 | 8,201 | 7,886 | 7,633 | 7,381 | 7,192 | 6,813 | 1 |
Weldon | Weldon 2025 | 14.00 | 10,409 | 9,968 | 9,526 | 9,130 | N/A | N/A | 1 |
Weldon | Weldon 2035 | 14.00 | 12,933 | 12,618 | 11,987 | 11,356 | N/A | N/A | 1 |
Weldon | Weldon 2345 | 14.00 | 14,510 | 13,690 | 13,122 | 11,671 | N/A | N/A | 1 |
Injector Dynamics | AMS Brushless * | 13.50 | 9,133 | 8,633 | 8,200 | 7,800 | 7,275 | 6,800 | 1 |
Injector Dynamics | ID BPC100 * | 8 to 16 | 19,166 | 19,166 | 19,166 | 19,166 | 19,166 | 19,166 | 1 |
*These pumps do not have check valves built in, and are not suitable for most staged pump fuel systems |
Input Data | |||
Gas | Ethanol | ||
Number of Injectors | 1 | 1 | |
Flow Rate (cc/min) | 2,600 | 2,600 | |
Total Flow (cc/min) | 2,600 | 2,600 | |
Estimated HP Capability | 421 | 273 |