Defi Can-Driver w/OBDII Sensor Adaptor & ADVANCE BF 60mm White Tachometer set

The Defi Can-Driver has been designed to operate multiple gauges by gathering data taken from your OBDII port. This is a perfect option for those of you who want to eliminate the need for excess wiring of sensors and to have a cleaner look. You can hook up a line of Advanced A1 gauges such as a tachometer, boost pressure, and various temperature gauges to the CAN Driver without the need to connect additional sensors. Other features include obtaining speed and engine speed signals on vehicles that cannot collect this data from the ECU.

Additional features include controlling the illumination functions from the CAN Driver, and peak/warning values can also be displayed.

Included with the CAN Driver is the OBDII hookup, required wiring, 12V vehicle plug in, as well as miscellaneous mounting hardware.

ADVANCE CAN Driver summary

ADVANCE CAN Driver is a unit to operate ADVANCE gauges by taking out ISO-CAN data from an OBDII connector.

This product is for people who want to install ADVANCE gauges easily without sensors and for vehicles in which engine speed signals cannot be obtained from ECU.

What you can do with CAN Driver

1. Vehicle information from OBDII can be sent to gauges without connecting sensors.
   
2. Speed and engine speed signals can be sent from OBDII to an ADVANCE tachometer or ADVANCE System (if installed) even from vehicles which those signals cannot be obtained from ECU.
   
3. Illumination ON/OFF signals can be sent to ADVANCE System from vehicles which illumination switching of Defi products doesn’t function normally because of illumination controlling (such as European illumination pulse vehicles).
   
4. Peak and warning values can be displayed. The illumination color for ADVANCE CR/RS can be changed.

Corresponding gauges

Tachometer, turbo/boost (120kPa/200kPa/29PSI), in-mani pressure, and water temperature gauges in ADVANCE series

• *Three gauges can be connected to one CAN Driver. Do not more than three gauges.
• *Gauges other than listed ones above cannot be connected.
• *ADVANCE ZD cannot be connected.
• *CAN Driver cannot be daisy-chained to the ADVANCE link system.

Lineup

DF15601 CAN Driver
DF15701 CAN Driver & ADVANCE BF 60mm tachometer set
DF15702 CAN Driver & ADVANCE BF 80mm tachometer set
DF15801 CAN Driver & ADVANCE A1 80mm tachometer set
*ADVANCE BFs are white models.
*60mm set is 9000RPM. 80mm sets are 11000RPM.

DF15701 CAN Driver & ADVANCE BF 60mm tachometer set

Specification

ADVANCE　System connection
The system is also designed to allow all sensors to be attached to the ADVANCE control unit so that gauges and displays can be mounted separately without the need for multiple tubing or wiring to each gauge.
The Defi-Link ADVANCE system allows gauges and displays to be attached to the ADVANCE control unit with a single “DAISY CHAIN” wiring system.
ADVANCE gauges, displays, and Control Unit are equipped with microcomputers. Distant gauges and displays can be operated at hand.

• *ADVANCE System (from 2009) and Defi-Link System (from 1998) are not compatible. Control unit and sensor wires for Defi-Link System cannot be used for ADVANCE System except some common sensors and extension wires.
• *To operate ADVANCE gauges and displays, ADVANCE Control Unit is necessary.

Wiring diagram

• ※One Control Unit can control up to 7 ADVANCE gauges & displays in all. (except DSDF)
• ※All the gauges(&displays) can be connected to both Meter Output connectors.
• ※Different color gauges can be connected.
• ※The same variety of gauges cannot be connected. (Ex. Two turbo gauges cannot be connected.)
• ※More than 2 Displays(ZDs) can be connected.
• ※Gauges(& displays) can be connected in any order.
• ※Smart Adapter and DSDF need to be connected to the end of the meter line because they have only one connector for meter wire.