Defi Blue Racer Tachometer 80mm 11000rpm

On this page, you are looking at the Defi Tachometer. This particular tachometer is 80mm in size and reads all the way to 11k RPM. One of the key features of this particular tachometer is the classic theme. Which means that the design has been aimed at Japanese vintage cars with a nostalgic theme. However, you can use this tachometer in any vehicle that requires a tachometer.

Specifications

3 1/8in(80mm) series

Features 80mm tachometer

• The maximum angle of deflective 270 degrees (full sweep) is controlled by the microcomputer up to 4600 division (0.057degrees each) to provide high precision in the accuracy of the information generated. The stepping motor is sufficient for the quick response of all sorts of professional motorsports.
• The gauge dial is invisible while the ignition switch is off. Once the ignition switch is turned on, a clear display appears by colored LED illumination. The gauge dial illumination and the red-emitting needle pointer provide high visibility.
  
  Ignition Off
  
  Red Racer Gauge
• The scale is compressed to acquire great visibility and ease of use.
  *Wide-angle scale is used at the idling range 0~3,000RPM.
  *The scale is fitted to recent engine power band and a linear scale is used from 3,000RPM to 11,000RPM.
• The gauge dial and the needle pointer performs opening and closing modes interlocked with turning ON/OFF of the ignition.
• The maximum RPM during driving can be stored and checked later.
  
• There are 5 stages of brightness for the daytime and 6 stages for the nighttime. The brightness can be decreased/increased with the vehicle lights switched on/off.
• Two customer-defined warning RPMs can be set. When the RPMs are exceeded, the warning LED blinks/lights up and the warning buzzer sounds.
• The exclusive large-sized indicator which lights in green and red enhances the visibility of warnings in addition to the warning LED in the gauge.

   

  　　

• The large-sized switch unit with light is fixable on the gauge and is also detachable.

  　　

• Exclusive mounting band and back case
  The gauge is clinched by using the exclusive mounting band and back case. Wires can be stored in the back case neatly.

• Regular Position Bezel for 80mm (3 1/8") gauge is included in the product.
• *The illumination color can not be changed.

Lineup

White, red, and blue illumination colors are available. The illumination color cannot be switched.

Pictures may differ from the real products by processes and photography conditions, etc.