Brand
Defi
Monitor your coolant temperatures with the Defi Advance A1 Water Temperature Gauge. This gauge comes with a sensor, and it reads up to 120° C. This is a 60MM gauge, and like most Defi gauges, when not operating the face has a nice tinted finish. However, when the vehicle is operating it illuminate to a nice white LED finish. Aside from the sensor, the Defi Advance A1 Water Temperature gauge will come with the required wiring, mounting cup, as well as miscellaneous hardware.
Please note that to operate Defi's latest version of Advanced A1 gauges, you must have the CAN Driver.
Defi-Link Meter ADVANCE A1 is a series of gauges that need to be connected to the Defi-Link ADVANCE Control Unit.
ADVANCE A1 is a series of premium models that contain a metallic toned dial plate with convex scales. It also provides high visibility by using a low-reflection glass.
The numbers are not visible until the ignition is turned on.
Power supply voltage |
Supplied from Defi-Link ADVANCE Control Unit |
Current consumption | Maximum during 7 gauges are connected +B 2A(IGN ON), 5mA(IGN OFF) ILM 800mA |
Illumination color | White The illumination color cannot be changed. Pointer: red Warning LED: red Peak LED: blue |
Display range | Refer to lineup. |
The applicable number of cylinders | 1,2,3,4,5,6,8 |
Note |
*Products is for only on vehicles with a 12V electrical system. Never use products on 24V vehicles. |
The Defi-Link ADVANCE system allows gauges and displays to be attached to the ADVANCE control unit with a single “DAISY CHAIN” wiring system.
ADVANCE gauges, displays, and Control Unit are equipped with microcomputers. Distant gauges and displays can be operated at hand.
The system is also designed to allow all sensors to be attached to the ADVANCE control unit so that gauges and displays can be mounted separately without the need for multiple tubing or wiring to each gauge.
Defi
Share your thoughts with other customers