Racedom Infinity Plug and Play kit for Honda K Series (01-05)
Racedom create the Infinity Plug and Play kit for Honda K Series (2001-05) engines, which is a complete solution for changing the factory ECU with AEM Infinity 506.
Infinity Plug & Play kit for Honda K Series (2001-05). A true standalone system that eliminates the use of the factory ECU
The kit includes the Infinity 506 (PN:30-7106), the harness, the lambda sensor, the pressure sensor and the necessary wiring for the lambda sensor.
This kit is compatible with the following vehicles:
- Honda Civic Type R (K20A, K20A2 2001-2006)
- Honda Integra Type R (K20A 2001-2006)
- Honda Accord Euro R (K20A 2002-2008)
- Honda Civic Type R (K20A 2007-2011)
- Honda Stream (RN3 & RN4 FWD, K20A1 2001-2006)
- Acura RSX Type S (K20A2 2002-2004)
- Honda Integra Type R (AUDM/NZDM, K20A2 2002-2004)
- Acura RSX (K20A3 2002-2006)
- Honda Civic SiR (K20A3 2002-2005)
- Honda Civic Type S (K20A3 2002-2005)
This kit is a plug and play solution because you don’t need to cut any harness to install the ECU. With the Ecu we give you the main map to start the engine immediately.
Infinity-506 & 508 Stand-Alone Programmable Engine Management SystemThe Infinity-506 and Infinity-508 ECU, an affordable state-of-the-art engine control unit designed for four- and six-cylinder racing engines and V8 racing engines using high-impedance injectors.
Infinity-506 & Infinity-508 Stand-Alone Programmable Engine Management System
The Infinity-506 and Infinity-508 ECU, an affordable state-of-the-art engine control unit designed for four- and six-cylinder racing engines and V8 racing engines using high-impedance injectors. Extensive research and development was put into designing the Infinity-506/508 to ensure that it delivers an unmatched price point for this level of engine control.
Infinity-506
The Infinity-506 is designed for racing engines with up to 6 cylinders. It features a smaller footprint than the Infinity-7088/710 (5.855” x 5.55” x 1.8”) and a single, weatherproof 80-pin connector.
Infinity-508
The Infinity-508 is designed for high performance V8 crate engines and smaller race engines using high impedance injectors. It also features the same small footprint and single, weatherproof 80-pin connector as the Infinity-506.
Features
The Infinity-506/508 include all of the advanced features found in its larger iteration including the latest generation 200 MHz automotive processor that can process 400 MIPS. Airflow model based (VE) tuning eliminates lookup of many correction tables needed in previous generation ECUs. Flex fuel and multi-fuel capability, on-board wideband air/fuel control, map switching and knock control are included. Engine protection strategies include coolant temp, oil temp, AFR vs. MAP, intake air temp, knock or fuel pressure. Programmable drive-by-wire, variable cam timing, boost control, nitrous control and traction control are included. Data logging up to 64GB via a removable USB is standard with logging rates up to 1KHZ per channel. The Infinity-506/508 is able to communicate with 3rd party dashes and loggers and is AEMnet enabled. All maps can be password protected. Its sealed enclosure and IP67 rated communications ports are suitable for engine bay mounting.
Wiring Harnesses
AEM offers a flying lead wiring harness for the Infinity-506/508 that is 96” in length and pre wired with power, grounds, a power relay, fuse block, wideband and AEMnet. A Plug & Pin kit is also available for the Infinity-506/508 that includes an 80-pin connector with cover, 80 small pins, 1 micro relay with pins and 30 sealing plugs. Many Plug & Play adapter harnesses for popular race vehicles are currently in development and will be available in the near future.
Support
When you combine the Infinity-506/508’s capabilities and price point with AEM’s industry leading after-purchase support system that includes free technical support, there is no question that it is the ultimate engine control solution for race teams and weekend track cars with 4-6 cylinders or crate V8s/engines up to 8 cylinder using high impedance injectors.
INFINITY EMS FEATURES:
- Airflow model based (VE) tuning
- ECU Set Up Wizard simplifies start up
- Flex fuel compatible
- Multi fuel capable
- Drive by wire
- Variable valve control
- Multiple boost control strategies
- Nitrous control
- Map switching
- Internal Wideband UEGO air/fuel controller
- Dual knock sensing circuits
- Data logging up to 64GB
- Outputs to 3rd party dashes and data loggers
- Industry leading data transfer speed (up to 480Mb/sec)
- Integrated engine protection strategies
- Sealed enclosure and IP67 rated comms ports
Specifiacations | Infinity-712 PN:30-7103 |
Infinity-710 PN:30-7100 |
Infinity-708 PN:30-7101 |
Infinity-508 PN:30-7108 |
Infinity-506 PN:30-7106 |
Cylinders | Up to 12 | Up to 10 | Up to 8 | Up to 8 | Up to 6 |
Low Impedance Injectors (Sequential) | 12 | 10 | 8 | n/a | 6 |
High Impedance Injectors (Sequential) | 12 | 10 | 8 | Up to 8 | Up to 6 |
Coils (0-5v Falling Edge) | 12 | 10 | 8 | 8 | 6 |
Connector Pins | 129 | 129 | 129 | 80 | 80 |
Drive-By-Wire | Dual | Dual | Dual | Single | Single |
H-Bridge Channels | 2 | 2 | 2 | 1 | 1 |
CAN Channels | 2 | 2 | 2 | 2 | 2 |
2-Stroke Engines | Yes | Yes | Yes | Yes | Yes |
4-Stroke Engines | Yes | Yes | Yes | Yes | Yes |
Knock Control | 2-Channel | 2-Channel | 2-Channel | 2-Channel | 2-Channel |
Analog Voltage Inputs | Up to 17 | Up to 17 | Up to 17 | Up to 9 | Up to 9 |
Analog Temp Inputs | Up to 6 | Up to 6 | Up to 6 | Up to 3 | Up to 3 |
Digital Inputs | Up to 8 | Up to 8 | Up to 8 | Up to 6 | Up to 8 |
VR/Mag Inputs | Up to 6 | Up to 6 | Up to 6 | Up to 4 | Up to 4 |
On Board Wideband Air/Fuel Controllers | 2 | 2 | 2 | 1 | 1 |
High Side Outputs | Up to 2 | Up to 2 | Up to 2 | 1 | 1 |
Low Side Outputs | 10 | 10 | 10 | 6 | 8 |
4-Wire Stepper Motor Control | Yes | Yes | Yes | Yes | Yes |
Boost Control (RPM,Time,Gear,VSS,Switch Input,Flex Fuel Content) | Yes | Yes | Yes | Yes | Yes |
Engine Protection | Yes | Yes | Yes | Yes | Yes |
Variable Cam Control | Up to 4 | Up to 4 | Up to 4 | Up to 2 | Up to 2 |
Launch Control | Yes | Yes | Yes | Yes | Yes |
Nitrous Control | Up to 4-Stage | Up to 4-Stage | Up to 4-Stage | Single Stage | Single Stage |
Data Logging | Yes | Yes | Yes | Yes | Yes |
Traction Control | Up to 4-Wheel Speed | Up to 4-Wheel Speed | Up to 4-Wheel Speed | Up to 2-Wheel Speed | Up to 2-Wheel Speed |
Weather Resistant Sealed Electronics | Yes | Yes | Yes | Yes | Yes |
Enclosure Dimensions | 6.75"x6.00"x1.8" | 6.75"x6.00"x1.8" | 6.75"x6.00"x1.8" | 5.85"x5.55"x1.8" | 5.85"x5.55"x1.8" |
Weight | 24oz/680.4g | 24oz/680.4g | 24oz/680.4g | 16.80oz/476.27g | 16.80oz/476.27g |
WARNING
This installation is not for the tuning novice! Use this system with EXTREME caution! The AEM Infinity Programmable EMS allows for total flexibility in engine tuning. Misuse or improper tuning of this product can destroy your engine! If you are not well versed in engine dynamics and the tuning of engine management systems DO NOT attempt the installation.
NOTE
All supplied AEM calibrations, Wizards and other tuning information are offered as potential starting points only. IT IS THE RESPONSIBILITY OF THE ENGINE TUNER TO ULTIMATELY CONFIRM IF THE CALIBRATION IS SAFE FOR ITS INTENDED USE. AEM holds no responsibility for any engine damage that results from the misuse or mistuning of this product!
Infinity-506/508 PNP Jumper HarnessHonda/Acura K-Series (01-05)
AEM Infinity-506/508 Acura/Honda Plug & Play solution for its new Infinity-6 and 8h programmable ECUs, including manual transmission equipped 2001-05 K Series Honda racing engines. The Infinity ECU for these applications includes an engine-specific start-up calibration and connects via Plug & Play harnesses that are sold separately.
Complete Stand Alone Engine Control
The Infinity ECU combines with the Plug & Play harness to replace the factory ECU. It controls all of the engine functions and the Plug & Play wiring harness adapter eliminates the need for cutting and splicing wires.
Plug & Play Harness with Expansion Port
AEM’s Plug & Play harness (sold separately) includes a Wideband O2 connector, AEMnet connector for communication with other AEMnet enabled devices and an auxiliary connector with a Deutsch DTM 12P connector for adding common aftermarket sensors including fuel pressure, air inlet temperature, MAP, oil temperature and ethanol content sensor. The expansion port also includes a sensor ground, 5v reference, 12v power from relay and high side output for activating a relay or solenoid, a low side output for boost control and analog inputs for mode switch and no-lift shift.
The Infinity EMS delivers high-end engine control for the racing masses at a fraction of the cost. The Infinity-506 and -508 is even more affordable than its larger -708 and -710 version because it is designed for smaller racing engines using low impedance injectors up to 6 cylinders and race engines driving up to 8 high impedance injectors. It features a smaller footprint than the Infinity-8/-10 (5.855” x 5.55” x 1.8”) and a single, weatherproof 80-pin connector. Built around a latest-generation 200MHz automotive processor, all Infinity systems are capable of processing 400 MIPS (millions of instructions per second).
All Infinity systems currently come fully enabled without the need for feature add-on purchases. Combined with AEM’s industry leading after-purchase support system, including free technical support, the Infinity is the ultimate engine control solution for both professional race teams and weekend track cars.
The Infinity’s airflow-based tuning models simplify start up and speed up the tuning process by eliminating many of the lookup and trim tables (Correction Tables) necessary in previous generation ECUs.
AEM Infinity-6/8h Plug & Play Application Features:
- Airflow model based (VE) tuning
- ECU Set Up Wizard simplifies start up
- Base maps included
- Flex fuel compatible
- Multi fuel capable
- Variable valve control
- Multiple boost control strategies
- Nitrous control
- Map switching
- Internal wideband O2 controller
- Knock sensing circuit
- Data logging up to 64GB, up to 1KHz per channel
- Outputs to 3rd party dashes and data loggers
- Industry leading data transfer speed (up to 480Mb/sec)
- Broad range integrated engine protection strategies
- Sealed enclosure and IP67 rated comms ports
WARNING:
THIS PRODUCT MAY BE USED SOLELY ON VEHICLES USED IN SANCTIONED COMPETITION WHICH MAY NEVER BE USED UPON A PUBLIC ROAD OR HIGHWAY, UNLESS PERMITTED BY SPECIFIC REGULATORY EXEMPTION. INSTALLERS/USERS LOCATED OUTSIDE THE UNITED STATES SHOULD ACT IN ACCORDANCE WITH THEIR LOCAL LAWS AND REGULATIONS.
T IS THE RESPONSIBILITY OF THE INSTALLER AND/OR USER OF THIS PRODUCT TO ENSURE THAT IT IS USED IN COMPLIANCE WITH ALL APPLICABLE LAWS AND REGULATIONS, AND THIS PRODUCT MUST NOT BE PURCHASED IF THE INTENT IS TO USE IT IN AN UNLAWFUL MANNER.
3.5 Bar Map or 50 PSIA Sensor Kit
50 PSIa MAP Stainless Steel Sensor Kit. Stainless Steel Sensor Body. 1/8" NPT Male Thread. Includes: 50 PSIa Stainless Steel Sensor and connector and pins
Sensor Performance Specifications:
- Accuracy: +/- 1% Full Scale over -40C to 105C includes Repeatability, Hysteresis and Linearity
- Operating Temp: -40C to 105C / -40F to 221F
- Burst Pressure: 500PSI
- Response Time: < 1mS
- Wetted Materials: 304L & 316L Stainless Steel
- Vibration: 100 to 2000Hz, 20g Sinusoidal, 3 Axes
- Weight: <85g
- Supply Current: <6mA at 5 Vdc
- Output: .5 to 4.5Vdc Linear
- Transfer Function: PSI = (12.5*(Voltage))-20.95
- Elec. Termination: Integral weatherproof connector, includes mating connector with 12" leads, 1 Red (Supply Voltage 5Vdc +/- .5), 1 Black (Ground), 1 Green (Output)
Bosch Wideband UEGO O2 sensor
OVERVIEW
The kit includes the Bosch sensor 4.2LSU for use with any AEM Wideband UEGO Controller or Meter .
The Bosch sensor 4.2LSU, who gives the AEM Wideband controllers has great accuracy and speed. In the factory during manufacture calibrate properly and never requires calibration with air is used with an AEM controller!
KEY FEATURES
- No free air calibration required - ever
- Accurate to 0.1 AFR
Infinity O2 Sensor Extension HarnessInfinity Supported applications refer to an engine family or cam/crank pattern for which the Infinity ECU has been tested and validated to run. However, certain ancillary vehicle systems (such as factory instrument clusters, automatic transmissions, and certain drive by wire throttles), may not be supported.
Infinity O2 Sensor Extension Harness
Supported Applications
Infinity Supported applications refer to an engine family or cam/crank pattern for which the Infinity ECU has been tested and validated to run. However, certain ancillary vehicle systems (such as factory instrument clusters, automatic transmissions, and certain drive by wire throttles), may not be supported.
The setup Wizard included with the InfinityTuner user interface software dramatically simplifies initial tuning configuration to help ensure successful initial startup for Supported applications.
Wiring will be required for Supported applications. AEM offers Universal wiring harnesses in several iterations and detailed application-specific wiring instructions/schematics.
CLICK HERE for a current list of Infinity applications and available wiring harnesses.
Plug & Play Applications
Infinity Plug & Play applications are available for select vehicles. Plug & Play applications support a vehicle's engine and most other ancillary vehicle systems, and include application-specific start up calibrations. The Infinity Plug & Play harness (sold separately) connects directly into the vehicle's factory ECU harness and requires no additional wiring.
CLICK HERE for a current list of Infinity applications and available wiring harnesses.
AEM's Infinity Universal wiring harness simplifies the process of wiring your vehicle. It includes everything you need in one easy-to-follow configuration. Premium-quality wiring is wrapped by color-coded insulated shielding that features silk screened functions on the body of each wire. Integrated into the bundle is a main fuse and relay panel harness with built-in fuses and relays, and a positive locking, weather-resistant connector with plug and wire seals.
- Ideal starter harness for a custom installation
- Up to 12 (0-5V) ignition outputs
- High quality, automotive-grade wire
- Inkjet wire labels for easy identification
- Pre-spliced and terminated power and ground distribution
- Spare parts kit includes 100 pre-terminated multi-color flying leads and cavity seals. Use only what your installation requires